^^&&^^

Edit File: brute.lua

---
-- The brute library is an attempt to create a common framework for performing
-- password guessing against remote services. 
--
-- The library currently attempts to parallellize the guessing by starting
-- a number of working threads. The number of threads can be defined using
-- the brute.threads argument, it defaults to 10.
--
-- The library contains the following classes:
-- * <code>Account</code>
-- ** Implements a simple account class, that converts account "states" to common text representation.
-- ** The state can be either of the following: OPEN, LOCKED or DISABLED
-- * <code>Engine</code>
-- ** The actual engine doing the brute-forcing .
-- * <code>Error</code>
-- ** Class used to return errors back to the engine.
-- * <code>Options</code>
-- ** Stores any options that should be used during brute-forcing.
--
-- In order to make use of the framework a script needs to implement a Driver 
-- class. The Driver class is then to be passed as a parameter to the Engine 
-- constructor, which creates a new instance for each guess. The Driver class 
-- SHOULD implement the following four methods:
--
-- <code>
-- Driver:login = function( self, username, password )
-- Driver:check = function( self )
-- Driver:connect = function( self )
-- Driver:disconnect = function( self )
-- </code>
--
-- The <code>login</code> method does not need a lot of explanation. The login
-- function should return two parameters. If the login was successful it should
-- return true and an <code>Account</code>. If the login was a failure it
-- should return false and an <code>Error</code>. The driver can signal the
-- Engine to retry a set of credentials by calling the Error objects
-- <code>setRetry</code> method. It may also signal the Engine to abort all
-- password guessing by calling the Error objects <code>setAbort</code> method.
--
-- The following example code demonstrates how the Error object can be used.
-- 
-- <code>
-- 		-- After a number of incorrect attempts VNC blocks us, so we abort
-- 		if ( not(status) and x:match("Too many authentication failures") ) then
-- 			local err = brute.Error:new( data )
--			-- signal the engine to abort
-- 			err:setAbort( true )
-- 			return false, err			
-- 		elseif ( not(status) ) then
-- 			local err = brute.Error:new( "VNC handshake failed" )
-- 			-- This might be temporary, signal the engine to retry
-- 			err:setRetry( true )
-- 			return false, err
-- 		end
-- 		.
-- 		.
-- 		.
-- 		-- Return a simple error, no retry needed
-- 		return false, brute.Error:new( "Incorrect password" ) 
-- </code>
--
-- The purpose of the <code>check</code> method is to be able to determine
-- whether the script has all the information it needs, before starting the
-- brute force. It's the method where you should check, e.g., if the correct
-- database or repository URL was specified or not. On success, the
-- <code>check</code> method returns true, on failure it returns false and the
-- brute force engine aborts. 
--
-- NOTE: The <code>check</code> method is deprecated and will be removed from
-- all scripts in the future. Scripts should do this check in the action
-- function instead. 
--
-- The <code>connect</code> method provides the framework with the ability to
-- ensure that the thread can run once it has been dispatched a set of
-- credentials. As the sockets in NSE are limited we want to limit the risk of
-- a thread blocking, due to insufficient free sockets, after it has aquired a
-- username and password pair.
--
-- The following sample code illustrates how to implement a sample
-- <code>Driver</code> that sends each username and password over a socket.
--
-- <code>
--   Driver = {
--		new = function(self, host, port, options)
--			local o = {}
--       	setmetatable(o, self)
--	        self.__index = self
--			o.host = host
--			o.port = port
--			o.options = options
--			return o
--		end,
--		connect = function( self )
--			self.socket = nmap.new_socket()
--			return self.socket:connect( self.host, self.port )
--		end,
--		disconnect = function( self )
--			return self.socket:close()
--		end, 
--		check = function( self ) 
--			return true
--		end,
--		login = function( self, username, password )
--			local status, err, data
--			status, err = self.socket:send( username .. ":" .. password)
--			status, data = self.socket:receive_bytes(1)
--
--			if ( data:match("SUCCESS") ) then
--				return true, brute.Account:new(username, password, "OPEN")
--			end
--			return false, brute.Error:new( "login failed" )
--		end,
--   }
-- </code>
--
-- The following sample code illustrates how to pass the <code>Driver</code>
-- off to the brute engine.
--
-- <code>
--   action = function(host, port)
--      local options = { key1 = val1, key2 = val2 }
--      local status, accounts = brute.Engine:new(Driver, host, port, options):start()
--	    if( not(status) ) then
--	       return accounts
--      end
--      return stdnse.format_output( true, accounts )
--   end
-- </code>
--
-- For a complete example of a brute implementation consult the 
-- <code>svn-brute.nse</code> or <code>vnc-brute.nse</code> scripts
--
-- @args brute.useraspass guess the username as password for each user
--       (default: true)
-- @args brute.emptypass guess an empty password for each user
--       (default: false)
-- @args brute.unique make sure that each password is only guessed once
--       (default: true)
-- @args brute.firstonly stop guessing after first password is found
--       (default: false)
-- @args brute.passonly iterate over passwords only for services that provide
--       only a password for authentication. (default: false)
-- @args brute.retries the number of times to retry if recoverable failures
--       occure. (default: 3)
-- @args brute.delay the number of seconds to wait between guesses (default: 0)
-- @args brute.threads the number of initial worker threads, the number of
--       active threads will be automatically adjusted.
-- @args brute.mode can be user, pass or creds and determines what mode to run
--       the engine in.
--       * user - the unpwdb library is used to guess passwords, every password
--                password is tried for each user. (The user iterator is in the
--                outer loop)
--       * pass - the unpwdb library is used to guess passwords, each password
--                is tried for every user. (The password iterator is in the
--                outer loop)
--       * creds- a set of credentials (username and password pairs) are
--                guessed against the service. This allows for lists of known
--                or common username and password combinations to be tested.
--       If no mode is specified and the script has not added any custom
--       iterator the pass mode will be enabled.
-- @args brute.credfile a file containing username and password pairs delimited
--       by '/'
-- @args brute.guesses the number of guesses to perform against each account.
--       (default: 0 (unlimited)). The argument can be used to prevent account
--       lockouts.
--
-- @author "Patrik Karlsson <patrik@cqure.net>"
-- @copyright Same as Nmap--See http://nmap.org/book/man-legal.html

--
-- Version 0.73
-- Created 06/12/2010 - v0.1 - created by Patrik Karlsson <patrik@cqure.net>
-- Revised 07/13/2010 - v0.2 - added connect, disconnect methods to Driver
--							   <patrik@cqure.net>
-- Revised 07/21/2010 - v0.3 - documented missing argument brute.mode
-- Revised 07/23/2010 - v0.4 - fixed incorrect statistics and changed output to 
--							   include statistics, and to display "no accounts
--							   found" message.
-- Revised 08/14/2010 - v0.5 - added some documentation and smaller changes per
--                             David's request.
-- Revised 08/30/2010 - v0.6 - added support for custom iterators and did some
--                             needed cleanup.
-- Revised 06/19/2011 - v0.7 - added support for creds library [Patrik]
-- Revised 07/07/2011 - v0.71- fixed some minor bugs, and changed credential
--                             iterator to use a file handle instead of table
-- Revised 07/21/2011 - v0.72- added code to allow script reporting invalid
--								(non existing) accounts using setInvalidAccount
-- Revised 11/12/2011 - v0.73- added support for max guesses per account to 
--                             prevent account lockouts.
--                             bugfix: added support for guessing the username
--                             as password per default, as suggested by the
--                             documentation.

local coroutine = require "coroutine"
local creds = require "creds"
local io = require "io"
local nmap = require "nmap"
local os = require "os"
local stdnse = require "stdnse"
local table = require "table"
local unpwdb = require "unpwdb"
_ENV = stdnse.module("brute", stdnse.seeall)

-- Engine options that can be set by scripts
-- Supported options are:
--   * firstonly   - stop after finding the first correct password
--                   (can be set using script-arg brute.firstonly)
--   * passonly    - guess passwords only, don't supply a username
--                   (can be set using script-arg brute.passonly)
--   * max_retries - the amount of retries to do before aborting
--                   (can be set using script-arg brute.retries)
--   * delay       - sets the delay between attempts
--                   (can be set using script-arg brute.delay)
--   * mode        - can be set to either cred, user or pass and controls
--                   whether the engine should iterate over users, passwords
--                   or fetch a list of credentials from a single file.
--                   (can be set using script-arg brut.mode)
--   * title       - changes the title of the result table where the
--                   passwords are returned.
--   * nostore     - don't store the results in the credential library
--   * max_guesses - the maximum amount of guesses to perform for each
--                   account.
--   * useraspass  - guesses the username as password (default: true)
--   * emptypass   - guesses an empty string as password (default: false)
--
Options = {
	
	new = function(self)
		local o = {}
       	setmetatable(o, self)
        self.__index = self

o.emptypass = self.checkBoolArg("brute.emptypass", false)
		o.useraspass = self.checkBoolArg("brute.useraspass", true)
		o.firstonly = self.checkBoolArg("brute.firstonly", false)
		o.passonly = self.checkBoolArg("brute.passonly", false)
		o.max_retries = tonumber( nmap.registry.args["brute.retries"] ) or 3
		o.delay = tonumber( nmap.registry.args["brute.delay"] ) or 0
		o.max_guesses = tonumber( nmap.registry.args["brute.guesses"] ) or 0

return o
	end,
	
	--- Checks if a script argument is boolean true or false
	--
	-- @param arg string containing the name of the argument to check
	-- @param default boolean containing the default value
	-- @return boolean, true if argument evaluates to 1 or true, else false
	checkBoolArg = function( arg, default )
		local val = stdnse.get_script_args(arg) or default
		return (val == "true" or val==true or tonumber(val)==1)
	end,
	
	--- Sets the brute mode to either iterate over users or passwords
	-- @see description for more information.
	--
	-- @param mode string containing either "user" or "password"
	-- @return status true on success else false
	-- @return err string containing the error message on failure
	setMode = function( self, mode )
		local modes = { "password", "user", "creds" }
		local supported = false
		
		for _, m in ipairs(modes) do
			if ( mode == m ) then supported = true end
		end
		
		if ( not(supported) ) then
			stdnse.print_debug("ERROR: brute.options.setMode: mode %s not supported", mode)
			return false, "Unsupported mode"
		else
			self.mode = mode
		end
		return true
	end,

--- Sets an option parameter
	--
	-- @param param string containing the parameter name
	-- @param value string containing the parameter value
	setOption = function( self, param, value ) self[param] = value end,
	
	--- Set an alternate title for the result output (default: Accounts)
	--
	-- @param title string containing the title value
	setTitle = function(self, title) self.title = title end,

}

-- The account object which is to be reported back from each driver
Account =
{
	--- Creates a new instance of the Account class
	--
	-- @param username containing the user's name
	-- @param password containing the user's password
	-- @param state containing the account state and should be one of the
	--        following <code>OPEN</code>, <code>LOCKED</code>,
	--        <code>DISABLED</code>.
	new = function(self, username, password, state)
		local o = { username = username, password = password, state = state }
       	setmetatable(o, self)
        self.__index = self
		return o
	end,
	
	--- Converts an account object to a printable script
	--
	-- @return string representation of object
	toString = function( self )
		local c
		if ( #self.username > 0 ) then
			c = ("%s:%s"):format( self.username, #self.password > 0 and self.password or "<empty>" )
		else
			c = ("%s"):format( ( self.password and #self.password > 0 ) and self.password or "<empty>" )
		end
		if ( creds.StateMsg[self.state] ) then
			return ( "%s - %s"):format(c, creds.StateMsg[self.state] )
		else
			return ("%s"):format(c)
		end
	end,
			
}

-- The Error class, is currently only used to flag for retries
-- It also contains the error message, if one was returned from the driver.
Error =
{
	retry = false,
	
	new = function(self, msg)
		local o = { msg = msg, done = false }
       	setmetatable(o, self)
        self.__index = self
		return o
	end,
	
	--- Is the error recoverable?
	--
	-- @return status true if the error is recoverable, false if not
	isRetry = function( self ) return self.retry end,
	
	--- Set the error as recoverable
	--
	-- @param r boolean true if the engine should attempt to retry the
	--        credentials, unset or false if not
	setRetry = function( self, r ) self.retry = r end,
	
	--- Set the error as abort all threads
	--
	-- @param b boolean true if the engine should abort guessing on all threads
	setAbort = function( self, b ) self.abort = b end,
	
	--- Was the error abortable
	--
	-- @return status true if the driver flagged the engine to abort
	isAbort = function( self ) return self.abort end,
	
	--- Get the error message reported
	--
	-- @return msg string containing the error message
	getMessage = function( self ) return self.msg end,
	
	--- Is the thread done?
	--
	-- @return status true if done, false if not
	isDone = function( self ) return self.done end,
	
	--- Signals the engine that the thread is done and should be terminated
	--
	-- @param b boolean true if done, unset or false if not
	setDone = function( self, b ) self.done = b end,
	
	-- Marks the username as invalid, aborting further guessing.
	-- @param username
	setInvalidAccount = function(self, username)
		self.invalid_account = username
	end,

-- Checks if the error reported the account as invalid.
	-- @return username string containing the invalid account
	isInvalidAccount = function(self)
		return self.invalid_account 
	end,
	
}

-- The brute engine, doing all the nasty work
Engine =
{
	STAT_INTERVAL = 20,
		
	--- Creates a new Engine instance
	--
	-- @param driver, the driver class that should be instantiated
	-- @param host table as passed to the action method of the script
	-- @param port table as passed to the action method of the script
	-- @param options table containing any script specific options
	-- @return o new Engine instance	
	new = function(self, driver, host, port, options)
		local o = { 
			driver = driver,
			host = host,
			port = port,
			driver_options = options,
			terminate_all = false,
			error = nil,
			counter = 0,
			threads = {},
			tps = {},
			iterator = nil ,
			usernames = usernames_iterator(),
			passwords = passwords_iterator(),
			found_accounts = {},
			account_guesses = {},
			options = Options:new(),
		}
		setmetatable(o, self)
		self.__index = self
		o.max_threads = stdnse.get_script_args("brute.threads") or 10
		return o
	end,

--- Sets the username iterator 
	-- 
	-- @param usernameIterator function to set as a username iterator
	setUsernameIterator = function(self,usernameIterator)
		self.usernames = usernameIterator
	end,
	
	--- Sets the password iterator 
	-- 
	-- @param passwordIterator function to set as a password iterator
	setPasswordIterator = function(self,passwordIterator)
		self.passwords = passwordIterator
	end,
	
	--- Limit the number of worker threads
	--
	-- @param max number containing the maximum number of allowed threads
	setMaxThreads = function( self, max ) self.max_threads = max end,
			
	--- Returns the number of non-dead threads
	--
	-- @return count number of non-dead threads
	threadCount = function( self )
		local count = 0

for thread in pairs(self.threads) do
			if ( coroutine.status(thread) == "dead" ) then
				self.threads[thread] = nil
			else
				count = count + 1
			end
		end
		return count
	end,
	
	--- Calculates the number of threads that are actually doing any work
	--
	-- @return count number of threads performing activity
	activeThreads = function( self )
		local count = 0
		for thread, v in pairs(self.threads) do
			if ( v.guesses ~= nil ) then count = count + 1 end
		end
		return count		
	end,
	
	--- Iterator wrapper used to iterate over all registered iterators
	--
	-- @return iterator function
	get_next_credential = function( self )
		local function next_credential ()
			for user, pass in self.iterator do
				-- makes sure the credentials have not been tested before
				self.used_creds = self.used_creds or {}
				pass = pass or "nil"
				if ( not(self.used_creds[user..pass]) ) then
					self.used_creds[user..pass] = true
					coroutine.yield( user, pass )
				end
			end
			while true do coroutine.yield(nil, nil) end
		end
		return coroutine.wrap( next_credential )
	end,
	
	--- Does the actual authentication request
	--
	-- @return true on success, false on failure
	-- @return response Account on success, Error on failure
	doAuthenticate = function( self )

local status, response
		local next_credential = self:get_next_credential()
		local retries = self.options.max_retries
		local username, password
		
		repeat
			local driver = self.driver:new( self.host, self.port, self.driver_options )
			status = driver:connect()

-- Did we succesfully connect?
			if ( status ) then
				if ( not(username) and not(password) ) then
					repeat
						username, password = next_credential()
						if ( not(username) and not(password) ) then
							driver:disconnect()
							self.threads[coroutine.running()].terminate = true
							return false 
						end
					until ( ( not(self.found_accounts) or not(self.found_accounts[username]) ) and
						  ( self.options.max_guesses == 0 or not(self.account_guesses[username]) or 
						    self.options.max_guesses > self.account_guesses[username] ) )
					
					-- increases the number of guesses for an account
					self.account_guesses[username] = self.account_guesses[username] and self.account_guesses[username] + 1 or 1
				end

-- make sure that all threads locked in connect stat terminate quickly
				if ( Engine.terminate_all ) then 
					driver:disconnect()
					return false
				end
			
				local c
				-- Do we have a username or not?
				if ( username and #username > 0 ) then
					c = ("%s/%s"):format(username, #password > 0 and password or "<empty>")
				else
					c = ("%s"):format(#password > 0 and password or "<empty>")
				end
			
				local msg = ( retries ~= self.options.max_retries ) and "Re-trying" or "Trying"
				stdnse.print_debug(2, "%s %s against %s:%d", msg, c, self.host.ip, self.port.number )
				status, response = driver:login( username, password )

driver:disconnect()
				driver = nil		
			end

retries = retries - 1

-- End if:
		-- * The guess was successfull
		-- * The response was not set to retry
		-- * We've reached the maximum retry attempts
		until( status or ( response and not( response:isRetry() ) ) or retries == 0)
	
		-- Increase the amount of total guesses
		self.counter = self.counter + 1
					
		-- did we exhaust all retries, terminate and report?
		if ( retries == 0 ) then
			Engine.terminate_all = true
			self.error = "Too many retries, aborted ..."
			response = Error:new("Too many retries, aborted ...")
			response.abort = true
		end
		return status, response
	end,
	
	login = function(self, cvar )
		local condvar = nmap.condvar( cvar )		
		local thread_data = self.threads[coroutine.running()]
		local interval_start = os.time()
		
		while( true ) do
			-- Should we terminate all threads?
			if ( self.terminate_all or thread_data.terminate ) then break	end
			
			local status, response = self:doAuthenticate()
				
			if ( status ) then
				-- Prevent locked accounts from appearing several times
				if ( not(self.found_accounts) or self.found_accounts[response.username] == nil ) then
					if ( not(self.options.nostore) ) then
						creds.Credentials:new( self.options.script_name, self.host, self.port ):add(response.username, response.password, response.state )
					else
						self.credstore = self.credstore or {}
						table.insert(self.credstore, response:toString() )
					end
					
					stdnse.print_debug("Discovered account: %s", response:toString())

-- if we're running in passonly mode, and want to continue guessing
					-- we will have a problem as the username is always the same.
					-- in this case we don't log the account as found.
					if ( not(self.options.passonly) ) then
						self.found_accounts[response.username] = true
					end
					
					-- Check if firstonly option was set, if so abort all threads
					if ( self.options.firstonly ) then self.terminate_all = true end
				end
			else
				if ( response and response:isAbort() ) then
					self.terminate_all = true
					self.error = response:getMessage()
					break
				elseif( response and response:isDone() ) then
					break
				elseif ( response and response:isInvalidAccount() ) then
					self.found_accounts[response:isInvalidAccount()] = true
				end
			end
				
			local timediff = (os.time() - interval_start)
	
			-- This thread made another guess
			thread_data.guesses = ( thread_data.guesses and thread_data.guesses + 1 or 1 )

-- Dump statistics at regular intervals
			if ( timediff > Engine.STAT_INTERVAL ) then
				interval_start = os.time()
				local tps = self.counter / ( os.time() - self.starttime )
				table.insert(self.tps, tps )
				stdnse.print_debug(2, "threads=%d,tps=%d", self:activeThreads(), tps )
			end

-- if delay was speciefied, do sleep
			if ( self.options.delay > 0 ) then stdnse.sleep( self.options.delay ) end
		end
		condvar "signal"
	end,
			
	--- Starts the brute-force
	--
	-- @return status true on success, false on failure
	-- @return err string containing error message on failure
	start = function(self)
	
		local cvar = {}
		local condvar = nmap.condvar( cvar )
		
		assert(self.options.script_name, "SCRIPT_NAME was not set in options.script_name")
		assert(self.port.number and self.port.protocol, "Invalid port table detected")
		self.port.service = self.port.service or "unknown"
		
		-- Only run the check method if it exist. We should phase this out
		-- in favor of a check in the action function of the script
		if ( self.driver:new( self.host, self.port, self.driver_options ).check ) then
			-- check if the driver is ready!
			local status, response = self.driver:new( self.host, self.port, self.driver_options ):check()
			if( not(status) ) then return false, response end
		end
		
		local usernames = self.usernames
		local passwords = self.passwords

if ( "function" ~= type(usernames) ) then
			return false, "Invalid usernames iterator"
		end
		if ( "function" ~= type(passwords) ) then
			return false, "Invalid passwords iterator"
		end

local mode = self.options.mode or stdnse.get_script_args("brute.mode")
	
		-- if no mode was given, but a credfile is present, assume creds mode
		if ( not(mode) and stdnse.get_script_args("brute.credfile") ) then
			if ( stdnse.get_script_args("userdb") or
				 stdnse.get_script_args("passdb") ) then
				return false, "\n  ERROR: brute.credfile can't be used in combination with userdb/passdb"
			end
			mode = 'creds'
		end
	
		-- Are we guessing against a service that has no username (eg. VNC)
		if ( self.options.passonly ) then
			local function single_user_iter(next)
				local function next_user() coroutine.yield( "" ) end
				return coroutine.wrap(next_user)
			end
			-- only add this iterator if no other iterator was specified
			if self.iterator == nil  then
				self.iterator = Iterators.user_pw_iterator( single_user_iter(), passwords ) 
			end
		elseif ( mode == 'creds' ) then
			local credfile = stdnse.get_script_args("brute.credfile")
			if ( not(credfile) ) then
				return false, "No credential file specified (see brute.credfile)"
			end
		
			local f = io.open( credfile, "r" )
			if ( not(f) ) then
				return false, ("Failed to open credfile (%s)"):format(credfile)
			end
		
			self.iterator = Iterators.credential_iterator( f ) 
		elseif ( mode and mode == 'user' ) then
			self.iterator = self.iterator or Iterators.user_pw_iterator( usernames, passwords ) 
		elseif( mode and mode == 'pass' ) then
			self.iterator = self.iterator or Iterators.pw_user_iterator( usernames, passwords ) 
		elseif ( mode ) then
			return false, ("Unsupported mode: %s"):format(mode)
		-- Default to the pw_user_iterator in case no iterator was specified
		elseif ( self.iterator == nil ) then
			self.iterator = Iterators.pw_user_iterator( usernames, passwords )
		end

if ( ( not(mode) or mode == 'user' or mode == 'pass' ) and self.options.useraspass ) then
			-- if we're only guessing passwords, this doesn't make sense
			if ( not(self.options.passonly) ) then
				self.iterator = unpwdb.concat_iterators(Iterators.pw_same_as_user_iterator(usernames, "lower"),self.iterator)
			end
		end
		
		if ( ( not(mode) or mode == 'user' or mode == 'pass' ) and self.options.emptypass ) then
			local function empty_pass_iter()
				local function next_pass()
					coroutine.yield( "" )
				end
				return coroutine.wrap(next_pass)
			end
			self.iterator = Iterators.account_iterator(usernames, empty_pass_iter(), mode or "pass")
		end

self.starttime = os.time()

-- Startup all worker threads
		for i=1, self.max_threads do
			local co = stdnse.new_thread( self.login, self, cvar )
			self.threads[co] = {}
			self.threads[co].running = true
		end

-- wait for all threads to finnish running
		while self:threadCount()>0 do condvar "wait" end
		
		local valid_accounts
		
		if ( not(self.options.nostore) ) then
			valid_accounts = creds.Credentials:new(self.options.script_name, self.host, self.port):getTable()
		else
			valid_accounts = self.credstore
		end
		
		local result = {}
		-- Did we find any accounts, if so, do formatting
		if ( valid_accounts and #valid_accounts > 0 ) then
			valid_accounts.name = self.options.title or "Accounts"
			table.insert( result, valid_accounts )
		else
			table.insert( result, {"No valid accounts found", name="Accounts"} )
		end
		
		-- calculate the average tps
		local sum = 0
		for _, v in ipairs( self.tps ) do sum = sum + v	end
		local time_diff = ( os.time() - self.starttime )
		time_diff = ( time_diff == 0 ) and 1 or time_diff
		local tps = ( sum == 0 ) and ( self.counter / time_diff ) or ( sum / #self.tps )

-- Add the statistics to the result
		local stats = {}
		table.insert(stats, ("Performed %d guesses in %d seconds, average tps: %d"):format( self.counter, time_diff, tps ) )
		stats.name = "Statistics"
		table.insert( result, stats )
		
		if ( self.options.max_guesses > 0 ) then
			-- we only display a warning if the guesses are equal to max_guesses
			for user, guesses in pairs(self.account_guesses) do
				if ( guesses == self.options.max_guesses ) then
					table.insert( result, { name = "Information", 
						  ("Guesses restricted to %d tries per account to avoid lockout"):format(self.options.max_guesses) } )
					break
				end
			end
		end

result = ( #result ) and stdnse.format_output( true, result ) or ""
		
		-- Did any error occure? If so add this to the result.
		if ( self.error ) then
			result = result .. ("  \n ERROR: %s"):format( self.error )
			return false, result
		end
		return true, result
	end,
	
}

--- Default username iterator that uses unpwdb 
--
usernames_iterator = function()
	local status, usernames = unpwdb.usernames()
	if ( not(status) ) then	return "Failed to load usernames" end
	return usernames
end

--- Default password iterator that uses unpwdb 
-- 
passwords_iterator = function()
	local status, passwords = unpwdb.passwords()
	if ( not(status) ) then	return "Failed to load passwords" end
	return passwords
end

Iterators = {

--- Iterates over each user and password
	--
	-- @param users table/function containing list of users
	-- @param pass table/function containing list of passwords
	-- @param mode string, should be either 'user' or 'pass' and controls
	--        whether the users or passwords are in the 'outer' loop
	-- @return function iterator
	account_iterator = function(users, pass, mode)		
		local function next_credential ()
			local outer, inner
			if "table" == type(users) then
				users = unpwdb.table_iterator(users)
			end
			if "table" == type(pass) then
				pass = unpwdb.table_iterator(pass)
			end
			
			if ( mode == 'pass' ) then
				outer, inner = pass, users
			elseif ( mode == 'user' ) then
				outer, inner = users, pass
			else
				return
			end

for o in outer do
				for i in inner do
					if ( mode == 'pass' ) then
						coroutine.yield( i, o )
					else
						coroutine.yield( o, i )
					end
				end
				inner("reset")
			end
			while true do coroutine.yield(nil, nil) end
		end
		return coroutine.wrap( next_credential )	
	end,

--- Try each password for each user (user in outer loop)
	--
	-- @param users table/function containing list of users
	-- @param pass table/function containing list of passwords
	-- @return function iterator
	user_pw_iterator = function( users, pass )
		return Iterators.account_iterator( users, pass, "user" )
	end,

--- Try each user for each password (password in outer loop)
	--
	-- @param users table/function containing list of users
	-- @param pass table/function containing list of passwords
	-- @return function iterator
	pw_user_iterator = function( users, pass )
		return Iterators.account_iterator( users, pass, "pass" )
	end,

--- An iterator that returns the username as password
	--
	-- @param users function returning the next user
	-- @param case string [optional] 'upper' or 'lower', specifies if user
	--        and password pairs should be case converted.
	-- @return function iterator
	pw_same_as_user_iterator = function( users, case )	
		local function next_credential ()
			for user in users do
				if ( case == 'upper' ) then
					coroutine.yield(user, user:upper())
				elseif( case == 'lower' ) then
					coroutine.yield(user, user:lower())
				else
					coroutine.yield(user, user)
				end
			end
			users("reset")
			while true do coroutine.yield(nil, nil) end
		end
		return coroutine.wrap( next_credential )
	end,

--- An iterator that returns the username and uppercase password
	--
	-- @param users table containing list of users
	-- @param pass table containing list of passwords
	-- @param mode string, should be either 'user' or 'pass' and controls
	--        whether the users or passwords are in the 'outer' loop
	-- @return function iterator
	pw_ucase_iterator = function( users, passwords, mode )
		local function next_credential ()
			for user, pass in Iterators.account_iterator(users, passwords, mode) do
				coroutine.yield( user, pass:upper() )
			end
			while true do coroutine.yield(nil, nil) end
		end
		return coroutine.wrap( next_credential )
	end,
	
	--- Credential iterator (for default or known user/pass combinations)
	--
	-- @param f file handle to file containing credentials separated by '/'
	-- @return function iterator
	credential_iterator = function( f )
		local function next_credential ()
			local c = {}
			for line in f:lines() do
				if ( not(line:match("^#!comment:")) ) then
					local trim = function(s) return s:match('^()%s*$') and '' or s:match('^%s*(.*%S)') end 
					line = trim(line)
					local user, pass = line:match("^([^%/]*)%/(.*)$")
					coroutine.yield( user, pass )
				end
			end
			f:close()
			while true do coroutine.yield( nil, nil ) end
		end
		return coroutine.wrap( next_credential )
	end,
		
	unpwdb_iterator = function( mode )
		local status, users, passwords

status, users = unpwdb.usernames()
		if ( not(status) ) then return end
		
		status, passwords = unpwdb.passwords()
		if ( not(status) ) then return end
		
		return Iterators.account_iterator( users, passwords, mode )
	end,
	
}

return _ENV;