^^&&^^

Edit File: broadcast-pim-discovery.nse

local nmap = require "nmap"
local packet = require "packet"
local ipOps = require "ipOps"
local bin = require "bin"
local stdnse = require "stdnse"
local target = require "target"
local table = require "table"
local math = require "math"
local string = require "string"

description = [[
Discovers routers that are running PIM (Protocol Independent Multicast).

This works by sending a PIM Hello message to the PIM multicast address
224.0.0.13 and listening for Hello messages from other routers.
]]

---
-- @args broadcast-pim-discovery.timeout Time to wait for responses in seconds.
-- Defaults to <code>5s</code>.
--
--@usage
-- nmap --script broadcast-pim-discovery
--
-- nmap --script broadcast-pim-discovery -e eth1 
--  --script-args 'broadcast-pim-discovery.timeout=10'
--
--@output
-- Pre-scan script results:
-- | broadcast-pim-discovery: 
-- |   172.16.0.12
-- |   172.16.0.31
-- |   172.16.0.44
-- |_  Use the newtargets script-arg to add the results as targets

author = "Hani Benhabiles"

license = "Same as Nmap--See http://nmap.org/book/man-legal.html"

categories = {"discovery", "safe", "broadcast"}

prerule = function() 
    if nmap.address_family() ~= 'inet' then
	stdnse.print_verbose("%s is IPv4 only.", SCRIPT_NAME)
	return false
    end
    if not nmap.is_privileged() then
	stdnse.print_verbose("%s not running for lack of privileges.", SCRIPT_NAME)
	return false
    end
    return true
end

-- Generates a raw PIM Hello message.
--@return hello Raw PIM Hello message 
local helloRaw = function()
    -- Version: 2, Type: Hello (0)
    local hello_raw = bin.pack(">C", 0x20)
    -- Reserved
    hello_raw = hello_raw.. bin.pack(">C", 0x00)
    -- Checksum: Calculated later
    hello_raw = hello_raw.. bin.pack(">S", 0x0000)
    -- Options (TLVs)
	-- Hold time 1 second
	hello_raw = hello_raw.. bin.pack(">SSS", 0x01, 0x02, 0x01)
	-- Generation ID: Random
	hello_raw = hello_raw.. bin.pack(">SSI", 0x14, 0x04, math.random(23456))
	-- DR Priority: 1
	hello_raw = hello_raw.. bin.pack(">SSI", 0x13, 0x04, 0x01)
	-- State fresh capable: Version = 1, interval = 0, Reserved
	hello_raw = hello_raw.. bin.pack(">SSCCS", 0x15, 0x04, 0x01, 0x00, 0x00)
    -- Calculate checksum
    hello_raw = hello_raw:sub(1,2) .. bin.pack(">S", packet.in_cksum(hello_raw)) .. hello_raw:sub(5)

return hello_raw 
end

-- Sends a PIM Hello message.
--@param interface Network interface to use.
--@param dstip Destination IP to which send the Hello.
local helloQuery = function(interface, dstip)
    local hello_packet, sock, eth_hdr
    local srcip = interface.address

local hello_raw = helloRaw()
    local ip_raw = bin.pack("H", "45c00040ed780000016718bc0a00c8750a00c86b") .. hello_raw 
    hello_packet = packet.Packet:new(ip_raw, ip_raw:len())
    hello_packet:ip_set_bin_src(ipOps.ip_to_str(srcip))
    hello_packet:ip_set_bin_dst(ipOps.ip_to_str(dstip))
    hello_packet:ip_set_len(ip_raw:len()) hello_packet:ip_count_checksum()

sock = nmap.new_dnet()
    sock:ethernet_open(interface.device)
    -- Ethernet multicast for PIM, our ethernet address and packet type IP
    eth_hdr = bin.pack(">HAS", "01 00 5e 00 00 0d", interface.mac, 0x0800)
    sock:ethernet_send(eth_hdr .. hello_packet.buf)
    sock:ethernet_close()
end

-- Listens for PIM Hello messages.
--@param interface Network interface to listen on.
--@param timeout Time to listen for a response.
--@param responses table to insert responders' IPs into.
local helloListen = function(interface, timeout, responses)
    local condvar = nmap.condvar(responses)
    local start = nmap.clock_ms()
    local listener = nmap.new_socket()
    local p, hello_raw, status, l3data, _

-- PIM packets that are sent to 224.0.0.13 and not coming from our host
    local filter = 'ip proto 103 and dst host 224.0.0.13 and src host not ' .. interface.address
    listener:set_timeout(100)
    listener:pcap_open(interface.device, 1024, true, filter)

while (nmap.clock_ms() - start) < timeout do
	status, _, _, l3data = listener:pcap_receive()
	if status then
	    p = packet.Packet:new(l3data, #l3data)
	    hello_raw = string.sub(l3data, p.ip_hl*4 + 1)
	    -- Check that PIM Type is Hello
	    if p and hello_raw:byte(1) == 0x20 then
		table.insert(responses, p.ip_src)
	    end
	end
    end
    condvar("signal")
end

--- Returns the network interface used to send packets to the destination host.
--@param destination host to which the interface is used.
--@return interface Network interface used for destination host.
local getInterface = function(destination)
    -- First, create dummy UDP connection to get interface
    local sock = nmap.new_socket()
    local status, err = sock:connect(destination, "12345", "udp")
    if not status then
	stdnse.print_verbose("%s: %s", SCRIPT_NAME, err)
	return
    end
    local status, address, _, _, _ = sock:get_info()
    if not status then
	stdnse.print_verbose("%s: %s", SCRIPT_NAME, err)
	return
    end
    for _, interface in pairs(nmap.list_interfaces()) do
	if interface.address == address then
	    return interface
	end
    end
end

action = function()
    local timeout = stdnse.parse_timespec(stdnse.get_script_args(SCRIPT_NAME .. ".timeout"))
    local responses = {}
    timeout = (timeout or 5) * 1000
    local mcast = "224.0.0.13"

-- Get the network interface to use
    local interface = nmap.get_interface() 
    if interface then
	interface = nmap.get_interface_info(interface) 
    else
	interface = getInterface(mcast)
    end
    if not interface then
	return ("\n ERROR: Couldn't get interface for %s"):format(mcast)
    end

stdnse.print_debug("%s: will send via %s interface.", SCRIPT_NAME, interface.shortname)

-- Launch listener
    stdnse.new_thread(helloListen, interface, timeout, responses)

-- Send Hello after small sleep so the listener doesn't miss any responses
    stdnse.sleep(0.1)
    helloQuery(interface, mcast)
    local condvar = nmap.condvar(responses)
    condvar("wait")

if #responses > 0 then
	table.sort(responses)
	if target.ALLOW_NEW_TARGETS then 
	    for _, response in pairs(responses) do
		target.add(response)
	    end
	else
	    table.insert(responses,"Use the newtargets script-arg to add the results as targets")
	end
	return stdnse.format_output(true, responses)
    end
end