^^&&^^

Edit File: mrinfo.nse

local nmap = require "nmap"
local packet = require "packet"
local ipOps = require "ipOps"
local bin = require "bin"
local stdnse = require "stdnse"
local string = require "string"
local target = require "target"
local table = require "table"

description = [[
Queries targets for multicast routing information.

This works by sending a DVMRP Ask Neighbors 2 request to the target and
listening for DVMRP Neighbors 2 responses that are sent back and which contain
local addresses and the multicast neighbors on each interface of the target. If
no specific target is specified, the request will be sent to the 224.0.0.1 All
Hosts multicast address.

This script is similar somehow to the mrinfo utility included with Windows and
Cisco IOS.  
]]

author = "Hani Benhabiles"

license = "Same as Nmap--See http://nmap.org/book/man-legal.html"

categories = {"discovery", "safe", "broadcast"}

prerule = function() 
    if nmap.address_family() ~= 'inet' then
	stdnse.print_verbose("%s is IPv4 only.", SCRIPT_NAME)
	return false
    end
    if not nmap.is_privileged() then
	stdnse.print_verbose("%s not running for lack of privileges.", SCRIPT_NAME)
	return false
    end
    return true
end

-- Parses a DVMRP Ask Neighbor 2 raw data and returns
-- a structured response.
-- @param data raw data.
local mrinfoParse = function(data)
    local index, address, neighbor
    local response = {}

-- first byte should be IGMP type == 0x13 (DVMRP)
    if data:byte(1) ~= 0x13 then return end

-- DVMRP Code
    index, response.code = bin.unpack(">C", data, 2)
    -- Checksum
    index, response.checksum = bin.unpack(">S", data, index)
    -- Capabilities (Skip one reserved byte)
    index, response.capabilities = bin.unpack(">C", data, index + 1)
    -- Major and minor version
    index, response.minver = bin.unpack(">C", data, index)
    index, response.majver = bin.unpack(">C", data, index)
    response.addresses = {}
    -- Iterate over target local addresses (interfaces)
    while index < #data do
	if data:byte(index) == 0x00 then break end
	address = {}
	-- Local address
	index, address.ip = bin.unpack("<I", data, index)
	address.ip = ipOps.fromdword(address.ip)
	-- Link metric
	index, address.metric = bin.unpack(">C", data, index)
	-- Treshold
	index, address.treshold= bin.unpack(">C", data, index)
	-- Flags
	index, address.flags = bin.unpack(">C", data, index)
	-- Number of neighbors 
	index, address.ncount = bin.unpack(">C", data, index)

address.neighbors = {}
	-- Iterate over neighbors
	for i = 1, address.ncount do
	    index, neighbor = bin.unpack("<I", data, index)
	    table.insert(address.neighbors, ipOps.fromdword(neighbor))
	end
	table.insert(response.addresses, address)
    end
    return response
end

-- Listens for DVMRP Ask Neighbors 2 responses
--@param interface Network interface to listen on.
--@param timeout Time to listen for a response.
--@param responses table to insert responses into.
local mrinfoListen = function(interface, timeout, responses)
    local condvar = nmap.condvar(responses)
    local start = nmap.clock_ms()
    local listener = nmap.new_socket()
    local p, mrinfo_raw, status, l3data, response, _

-- IGMP packets that are sent to our host
    local filter = 'ip proto 2 and dst host ' .. interface.address
    listener:set_timeout(100)
    listener:pcap_open(interface.device, 1024, true, filter)

while (nmap.clock_ms() - start) < timeout do
	status, _, _, l3data = listener:pcap_receive()
	if status then
	    p = packet.Packet:new(l3data, #l3data)
	    mrinfo_raw = string.sub(l3data, p.ip_hl*4 + 1)
	    if p then
		-- Check that IGMP Type == DVMRP (0x13) and DVMRP code == Neighbor 2 (0x06)
		if mrinfo_raw:byte(1) == 0x13 and mrinfo_raw:byte(2) == 0x06 then
		    response = mrinfoParse(mrinfo_raw)
		    if response then 
			response.srcip = p.ip_src
			table.insert(responses, response)
		    end
		end
	    end
	end
    end
    condvar("signal")
end

-- Function that generates a raw DVMRP Ask Neighbors 2 request.
local mrinfoRaw = function()
    -- Type: DVMRP
    local mrinfo_raw = bin.pack(">C", 0x13)
    -- Code: Ask Neighbor v2
    mrinfo_raw = mrinfo_raw.. bin.pack(">C", 0x05)
    -- Checksum: Calculated later
    mrinfo_raw = mrinfo_raw.. bin.pack(">S", 0x0000)
    -- Reserved
    mrinfo_raw = mrinfo_raw.. bin.pack(">S", 0x000a)
    -- Version == Cisco IOS 12.4
    -- Minor version: 4
    mrinfo_raw = mrinfo_raw.. bin.pack(">C", 0x04)
    -- Major version: 12
    mrinfo_raw = mrinfo_raw.. bin.pack(">C", 0x0c)
    -- Calculate checksum
    mrinfo_raw = mrinfo_raw:sub(1,2) .. bin.pack(">S", packet.in_cksum(mrinfo_raw)) .. mrinfo_raw:sub(5)

return mrinfo_raw 
end

-- Function that sends a DVMRP query.
--@param interface Network interface to use.
--@param dstip Destination IP to send to.
local mrinfoQuery = function(interface, dstip)
    local mrinfo_packet, sock, eth_hdr
    local srcip = interface.address

local mrinfo_raw = mrinfoRaw()
    local ip_raw = bin.pack("H", "45c00040ed780000400218bc0a00c8750a00c86b") .. mrinfo_raw 
    mrinfo_packet = packet.Packet:new(ip_raw, ip_raw:len())
    mrinfo_packet:ip_set_bin_src(ipOps.ip_to_str(srcip))
    mrinfo_packet:ip_set_bin_dst(ipOps.ip_to_str(dstip))
    mrinfo_packet:ip_set_len(ip_raw:len())
    if dstip == "224.0.0.1" then
	-- Doesn't affect results, but we should respect RFC 3171 :)
	mrinfo_packet:ip_set_ttl(1)
    end
    mrinfo_packet:ip_count_checksum()

sock = nmap.new_dnet()
    if dstip == "224.0.0.1" then
	sock:ethernet_open(interface.device)
	-- Ethernet IPv4 multicast, our ethernet address and packet type IP
	eth_hdr = bin.pack("HAH", "01 00 5e 00 00 01", interface.mac, "08 00")
	sock:ethernet_send(eth_hdr .. mrinfo_packet.buf)
	sock:ethernet_close()
    else
	sock:ip_open()
	sock:ip_send(mrinfo_packet.buf, dstip)
	sock:ip_close()
    end
end

-- Returns the network interface used to send packets to a target host.
--@param target host to which the interface is used.
--@return interface Network interface used for target host.
local getInterface = function(target)
    -- First, create dummy UDP connection to get interface
    local sock = nmap.new_socket()
    local status, err = sock:connect(target, "12345", "udp")
    if not status then
	stdnse.print_verbose("%s: %s", SCRIPT_NAME, err)
	return
    end
    local status, address, _, _, _ = sock:get_info()
    if not status then
	stdnse.print_verbose("%s: %s", SCRIPT_NAME, err)
	return
    end
    for _, interface in pairs(nmap.list_interfaces()) do
	if interface.address == address then
	    return interface
	end
    end
end

action = function()
    local timeout = stdnse.parse_timespec(stdnse.get_script_args(SCRIPT_NAME .. ".timeout"))
    timeout = (timeout or 5) * 1000
    local target = stdnse.get_script_args(SCRIPT_NAME .. ".target") or "224.0.0.1"
    local responses = {}
    local interface, result

interface = nmap.get_interface() 
    if interface then
	interface = nmap.get_interface_info(interface) 
    else
	interface = getInterface(target)
    end
    if not interface then
	return ("\n ERROR: Couldn't get interface for %s"):format(target)
    end

stdnse.print_debug("%s: will send to %s via %s interface.", SCRIPT_NAME, target, interface.shortname)

-- Thread that listens for responses
    stdnse.new_thread(mrinfoListen, interface, timeout, responses)

-- Send request after small wait to let Listener start
    stdnse.sleep(0.1)
    mrinfoQuery(interface, target)
    local condvar = nmap.condvar(responses)
    condvar("wait")

if #responses > 0 then
	local output, ifoutput = {}
	for _, response in pairs(responses) do
	    result = {}
	    result.name = "Source: " .. response.srcip
	    table.insert(result, ("Version %s.%s"):format(response.majver, response.minver))
	    for _, address in pairs(response.addresses) do
		ifoutput = {}
		ifoutput.name = "Local address: " .. address.ip
		for _, neighbor in pairs(address.neighbors) do
		    if target.ALLOW_NEW_TARGETS then target.add(neighbor) end
		    table.insert(ifoutput, "Neighbor: " .. neighbor)
		end
		table.insert(result, ifoutput)
	    end
	    table.insert(output, result)
	end
	if not target.ALLOW_NEW_TARGETS then
	    table.insert(output,"Use the newtargets script-arg to add the results as targets")
	end
	return stdnse.format_output(true, output)
    end
end