Edit File: jedec_ddr.h
/* * Definitions for DDR memories based on JEDEC specs * * Copyright (C) 2012 Texas Instruments, Inc. * * Aneesh V <aneesh@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef __LINUX_JEDEC_DDR_H #define __LINUX_JEDEC_DDR_H #include <linux/types.h> /* DDR Densities */ #define DDR_DENSITY_64Mb 1 #define DDR_DENSITY_128Mb 2 #define DDR_DENSITY_256Mb 3 #define DDR_DENSITY_512Mb 4 #define DDR_DENSITY_1Gb 5 #define DDR_DENSITY_2Gb 6 #define DDR_DENSITY_4Gb 7 #define DDR_DENSITY_8Gb 8 #define DDR_DENSITY_16Gb 9 #define DDR_DENSITY_32Gb 10 /* DDR type */ #define DDR_TYPE_DDR2 1 #define DDR_TYPE_DDR3 2 #define DDR_TYPE_LPDDR2_S4 3 #define DDR_TYPE_LPDDR2_S2 4 #define DDR_TYPE_LPDDR2_NVM 5 /* DDR IO width */ #define DDR_IO_WIDTH_4 1 #define DDR_IO_WIDTH_8 2 #define DDR_IO_WIDTH_16 3 #define DDR_IO_WIDTH_32 4 /* Number of Row bits */ #define R9 9 #define R10 10 #define R11 11 #define R12 12 #define R13 13 #define R14 14 #define R15 15 #define R16 16 /* Number of Column bits */ #define C7 7 #define C8 8 #define C9 9 #define C10 10 #define C11 11 #define C12 12 /* Number of Banks */ #define B1 0 #define B2 1 #define B4 2 #define B8 3 /* Refresh rate in nano-seconds */ #define T_REFI_15_6 15600 #define T_REFI_7_8 7800 #define T_REFI_3_9 3900 /* tRFC values */ #define T_RFC_90 90000 #define T_RFC_110 110000 #define T_RFC_130 130000 #define T_RFC_160 160000 #define T_RFC_210 210000 #define T_RFC_300 300000 #define T_RFC_350 350000 /* Mode register numbers */ #define DDR_MR0 0 #define DDR_MR1 1 #define DDR_MR2 2 #define DDR_MR3 3 #define DDR_MR4 4 #define DDR_MR5 5 #define DDR_MR6 6 #define DDR_MR7 7 #define DDR_MR8 8 #define DDR_MR9 9 #define DDR_MR10 10 #define DDR_MR11 11 #define DDR_MR16 16 #define DDR_MR17 17 #define DDR_MR18 18 /* * LPDDR2 related defines */ /* MR4 register fields */ #define MR4_SDRAM_REF_RATE_SHIFT 0 #define MR4_SDRAM_REF_RATE_MASK 7 #define MR4_TUF_SHIFT 7 #define MR4_TUF_MASK (1 << 7) /* MR4 SDRAM Refresh Rate field values */ #define SDRAM_TEMP_NOMINAL 0x3 #define SDRAM_TEMP_RESERVED_4 0x4 #define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5 #define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6 #define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7 #define NUM_DDR_ADDR_TABLE_ENTRIES 11 #define NUM_DDR_TIMING_TABLE_ENTRIES 4 /* Structure for DDR addressing info from the JEDEC spec */ struct lpddr2_addressing { u32 num_banks; u32 tREFI_ns; u32 tRFCab_ps; }; /* * Structure for timings from the LPDDR2 datasheet * All parameters are in pico seconds(ps) unless explicitly indicated * with a suffix like tRAS_max_ns below */ struct lpddr2_timings { u32 max_freq; u32 min_freq; u32 tRPab; u32 tRCD; u32 tWR; u32 tRAS_min; u32 tRRD; u32 tWTR; u32 tXP; u32 tRTP; u32 tCKESR; u32 tDQSCK_max; u32 tDQSCK_max_derated; u32 tFAW; u32 tZQCS; u32 tZQCL; u32 tZQinit; u32 tRAS_max_ns; }; /* * Min value for some parameters in terms of number of tCK cycles(nCK) * Please set to zero parameters that are not valid for a given memory * type */ struct lpddr2_min_tck { u32 tRPab; u32 tRCD; u32 tWR; u32 tRASmin; u32 tRRD; u32 tWTR; u32 tXP; u32 tRTP; u32 tCKE; u32 tCKESR; u32 tFAW; }; extern const struct lpddr2_addressing lpddr2_jedec_addressing_table[NUM_DDR_ADDR_TABLE_ENTRIES]; extern const struct lpddr2_timings lpddr2_jedec_timings[NUM_DDR_TIMING_TABLE_ENTRIES]; extern const struct lpddr2_min_tck lpddr2_jedec_min_tck; #endif /* __LINUX_JEDEC_DDR_H */