Edit File: sh_mmcif.h
/* * include/linux/mmc/sh_mmcif.h * * platform data for eMMC driver * * Copyright (C) 2010 Renesas Solutions Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License. * */ #ifndef LINUX_MMC_SH_MMCIF_H #define LINUX_MMC_SH_MMCIF_H #include <linux/io.h> #include <linux/platform_device.h> /* * MMCIF : CE_CLK_CTRL [19:16] * 1000 : Peripheral clock / 512 * 0111 : Peripheral clock / 256 * 0110 : Peripheral clock / 128 * 0101 : Peripheral clock / 64 * 0100 : Peripheral clock / 32 * 0011 : Peripheral clock / 16 * 0010 : Peripheral clock / 8 * 0001 : Peripheral clock / 4 * 0000 : Peripheral clock / 2 * 1111 : Peripheral clock (sup_pclk set '1') */ struct sh_mmcif_plat_data { int (*get_cd)(struct platform_device *pdef); unsigned int slave_id_tx; /* embedded slave_id_[tr]x */ unsigned int slave_id_rx; bool use_cd_gpio : 1; bool ccs_unsupported : 1; bool clk_ctrl2_present : 1; unsigned int cd_gpio; u8 sup_pclk; /* 1 :SH7757, 0: SH7724/SH7372 */ unsigned long caps; u32 ocr; }; #define MMCIF_CE_CMD_SET 0x00000000 #define MMCIF_CE_ARG 0x00000008 #define MMCIF_CE_ARG_CMD12 0x0000000C #define MMCIF_CE_CMD_CTRL 0x00000010 #define MMCIF_CE_BLOCK_SET 0x00000014 #define MMCIF_CE_CLK_CTRL 0x00000018 #define MMCIF_CE_BUF_ACC 0x0000001C #define MMCIF_CE_RESP3 0x00000020 #define MMCIF_CE_RESP2 0x00000024 #define MMCIF_CE_RESP1 0x00000028 #define MMCIF_CE_RESP0 0x0000002C #define MMCIF_CE_RESP_CMD12 0x00000030 #define MMCIF_CE_DATA 0x00000034 #define MMCIF_CE_INT 0x00000040 #define MMCIF_CE_INT_MASK 0x00000044 #define MMCIF_CE_HOST_STS1 0x00000048 #define MMCIF_CE_HOST_STS2 0x0000004C #define MMCIF_CE_CLK_CTRL2 0x00000070 #define MMCIF_CE_VERSION 0x0000007C /* CE_BUF_ACC */ #define BUF_ACC_DMAWEN (1 << 25) #define BUF_ACC_DMAREN (1 << 24) #define BUF_ACC_BUSW_32 (0 << 17) #define BUF_ACC_BUSW_16 (1 << 17) #define BUF_ACC_ATYP (1 << 16) /* CE_CLK_CTRL */ #define CLK_ENABLE (1 << 24) /* 1: output mmc clock */ #define CLK_CLEAR (0xf << 16) #define CLK_SUP_PCLK (0xf << 16) #define CLKDIV_4 (1 << 16) /* mmc clock frequency. * n: bus clock/(2^(n+1)) */ #define CLKDIV_256 (7 << 16) /* mmc clock frequency. (see above) */ #define SRSPTO_256 (2 << 12) /* resp timeout */ #define SRBSYTO_29 (0xf << 8) /* resp busy timeout */ #define SRWDTO_29 (0xf << 4) /* read/write timeout */ #define SCCSTO_29 (0xf << 0) /* ccs timeout */ /* CE_VERSION */ #define SOFT_RST_ON (1 << 31) #define SOFT_RST_OFF 0 static inline u32 sh_mmcif_readl(void __iomem *addr, int reg) { return __raw_readl(addr + reg); } static inline void sh_mmcif_writel(void __iomem *addr, int reg, u32 val) { __raw_writel(val, addr + reg); } #define SH_MMCIF_BBS 512 /* boot block size */ static inline void sh_mmcif_boot_cmd_send(void __iomem *base, unsigned long cmd, unsigned long arg) { sh_mmcif_writel(base, MMCIF_CE_INT, 0); sh_mmcif_writel(base, MMCIF_CE_ARG, arg); sh_mmcif_writel(base, MMCIF_CE_CMD_SET, cmd); } static inline int sh_mmcif_boot_cmd_poll(void __iomem *base, unsigned long mask) { unsigned long tmp; int cnt; for (cnt = 0; cnt < 1000000; cnt++) { tmp = sh_mmcif_readl(base, MMCIF_CE_INT); if (tmp & mask) { sh_mmcif_writel(base, MMCIF_CE_INT, tmp & ~mask); return 0; } } return -1; } static inline int sh_mmcif_boot_cmd(void __iomem *base, unsigned long cmd, unsigned long arg) { sh_mmcif_boot_cmd_send(base, cmd, arg); return sh_mmcif_boot_cmd_poll(base, 0x00010000); } static inline int sh_mmcif_boot_do_read_single(void __iomem *base, unsigned int block_nr, unsigned long *buf) { int k; /* CMD13 - Status */ sh_mmcif_boot_cmd(base, 0x0d400000, 0x00010000); if (sh_mmcif_readl(base, MMCIF_CE_RESP0) != 0x0900) return -1; /* CMD17 - Read */ sh_mmcif_boot_cmd(base, 0x11480000, block_nr * SH_MMCIF_BBS); if (sh_mmcif_boot_cmd_poll(base, 0x00100000) < 0) return -1; for (k = 0; k < (SH_MMCIF_BBS / 4); k++) buf[k] = sh_mmcif_readl(base, MMCIF_CE_DATA); return 0; } static inline int sh_mmcif_boot_do_read(void __iomem *base, unsigned long first_block, unsigned long nr_blocks, void *buf) { unsigned long k; int ret = 0; /* In data transfer mode: Set clock to Bus clock/4 (about 20Mhz) */ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, CLK_ENABLE | CLKDIV_4 | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD9 - Get CSD */ sh_mmcif_boot_cmd(base, 0x09806000, 0x00010000); /* CMD7 - Select the card */ sh_mmcif_boot_cmd(base, 0x07400000, 0x00010000); /* CMD16 - Set the block size */ sh_mmcif_boot_cmd(base, 0x10400000, SH_MMCIF_BBS); for (k = 0; !ret && k < nr_blocks; k++) ret = sh_mmcif_boot_do_read_single(base, first_block + k, buf + (k * SH_MMCIF_BBS)); return ret; } static inline void sh_mmcif_boot_init(void __iomem *base) { /* reset */ sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_ON); sh_mmcif_writel(base, MMCIF_CE_VERSION, SOFT_RST_OFF); /* byte swap */ sh_mmcif_writel(base, MMCIF_CE_BUF_ACC, BUF_ACC_ATYP); /* Set block size in MMCIF hardware */ sh_mmcif_writel(base, MMCIF_CE_BLOCK_SET, SH_MMCIF_BBS); /* Enable the clock, set it to Bus clock/256 (about 325Khz). */ sh_mmcif_writel(base, MMCIF_CE_CLK_CTRL, CLK_ENABLE | CLKDIV_256 | SRSPTO_256 | SRBSYTO_29 | SRWDTO_29 | SCCSTO_29); /* CMD0 */ sh_mmcif_boot_cmd(base, 0x00000040, 0); /* CMD1 - Get OCR */ do { sh_mmcif_boot_cmd(base, 0x01405040, 0x40300000); /* CMD1 */ } while ((sh_mmcif_readl(base, MMCIF_CE_RESP0) & 0x80000000) != 0x80000000); /* CMD2 - Get CID */ sh_mmcif_boot_cmd(base, 0x02806040, 0); /* CMD3 - Set card relative address */ sh_mmcif_boot_cmd(base, 0x03400040, 0x00010000); } #endif /* LINUX_MMC_SH_MMCIF_H */