^^&&^^

Edit File: Migration.BincIMAP.txt

Binc IMAP
=========

*WARNING: Badly done migration will cause your IMAP and/or POP3 clients to
re-download all mails. Read <Migration.txt> page first carefully.*

If you're using only Binc IMAP, it's possible to do a transparent Dovecot
migration.

Binc IMAP v1.2 and later
------------------------

binc2dovecot.pl attempts to do as perfect migration as possible. Basically it
reads Binc's uidlist files from the specified maildir and it's (sub-)folders
and generates 'dovecot-uidlist' files out of them. It also converts Binc's
subscription file. This script hasn't been tested with Binc IMAP< 1.2.

If Binc has been used with the IMAPdir depot format, it need to be converted to
Maildir++ with the script IMAPdir2Maildir++ before running binc2dovecot.pl.

IMAPdir2Maildir++

---%<-------------------------------------------------------------------------
#!/bin/bash
# BINC mailbox definition for the example parameters below
# Mailbox {
#     depot = "IMAPdir",
#     type = "Maildir",
#     path = "Maildir",
# }

#
# Parameters: set according to your local system settings
#

# Path to the IMAPdir
IMAPdirName="${1}/Maildir"

# Path to the new Maildir++ directory
maildirName="${1}/Maildir"

# Name used for the inbox with IMAPdir
inboxName="INBOX"

# the character . is invalid for Maildir++
# What string shall it be replaced with?
dotReplacementString="_cdot_"

#
# Below here nothing should need to be adjusted
#

# Initialise some variables and settings
shopt -s dotglob
orgDir=$(pwd)

# loop through all file names according to the pattern in $FILES
cd $IMAPdirName
FILES="*"
for file in $FILES
do
  # Skip over Maildir++ directories
  if [[ ${file:0:1} = "." && -e ${file}/maildirfolder ]]
  then
    continue
  fi
  # Skip over non-directory file names
  if [[ ! -d $file ]]
  then
    continue
  fi

# Move INBOX contents according to Maildir++ specification
  if [[ $file = $inboxName ]]
  then
    mv ${file}/* $maildirName
    rmdir $file
    continue
  fi

# create Maildir++ compliant new folder name
  newFile=${file//\\\\/\\}
  newFile=${newFile//\\./$dotReplacementString}
  newFile=${newFile/#./$dotReplacementString}
  newFile=.$newFile

# rename folder name according to Maildir++ specification & add maildirfolder
file
  mv "$file" "${maildirName}/$newFile"
  owner=$(stat -c %u "${maildirName}/$newFile")
  group=$(stat -c %g "${maildirName}/$newFile")
  touch "${maildirName}/$newFile/maildirfolder"
  chown $owner:$group "${maildirName}/$newFile/maildirfolder"
  chmod 600 "${maildirName}/$newFile/maildirfolder"
done

# Adapt subscriptions file
mv .bincimap-subscribed "${maildirName}/.bincimap-subscribed"
sed -i "s/\./$dotReplacementString/g" "${maildirName}/.bincimap-subscribed"

# Return to original working directory
cd $orgDir
---%<-------------------------------------------------------------------------

Usage: ./IMAPdir2Maildir++ /path/to/user

binc2dovecot.pl

---%<-------------------------------------------------------------------------
#!/usr/bin/perl

use IO::File;
use IO::Dir;
use File::stat;
use File::Basename;
use strict;

### Parameters to adapt to local cofiguration
# Name of the Maildir++ directory relative to the path passed as argument
my $mailbox = $ARGV[0]."/Maildir";
# Name space used by BINC for private folders, with IMAPdir often = ""
our $namespace = "INBOX.";

### Nothing should need to be changed below here
our $indent = 0;

die("Mailbox doesn't exist")
  if (!-d $mailbox);
parse_mailbox($mailbox);

# Sanity check for namespace
my $subscriptionsSize = -s $mailbox.'/subscriptions';
if ($subscriptionsSize == 0) {
  print $/;
  print $/;
  print "WARNING: Your new subscriptions file is empty. Are you using the
correct namespace? If not re-run script with correct namespace parameter.", $/;
}

sub parse_mailbox
{
  my ($mailbox) = @_;
  print " " x $indent, "Parsing ", $mailbox, " ...", $/;
  $indent += 2;

my $mb = IO::Dir->new($mailbox)
    or die("Unable to open mailbox $mailbox");
  while(my $file = $mb->read())
  {
    my $absfile = $mailbox."/".$file;
    next
      if ($file eq "." || $file eq "..");
    if ($file eq ".bincimap-subscribed" && -f $absfile)
    {
      convert_subscribtions($absfile);
    }
    elsif ($file eq "bincimap-cache" && -f $absfile)
    {
      convert_cache($absfile);
    }
    elsif (substr($file, 0, 1) eq "." && -d $absfile && -e
$absfile."/maildirfolder")
    {
      parse_mailbox($absfile);
    }
  }
  $mb->close();

$indent -= 2;
  return 1;
}

sub convert_cache
{
  my ($infile) = @_;
  my $dir = dirname($infile);
  my %uids = ();

print " " x $indent, "Converting cache...", $/;
  my $in = IO::File->new("<".$infile)
     or die("Unable to open cache file $infile");
  my ($blockopen, $uid) = (0, 0);
  my $id = "";
  while(my $line = $in->getline())
  {
    if ($line =~ /^\d+\s{$/)
    {
      $blockopen = 1;
      $uid = 0;
      $id = "";
      next;
    }
    elsif ($blockopen && $line =~ /^}$/)
    {
      $blockopen = 0;
      next;
    }
    elsif ($blockopen && $line =~ /^\t_UID\s=\s(\d+),?$/)
    {
      $uid = $1;
    }
    elsif ($blockopen && $line =~ /^\t_ID\s=\s"?(.*?)"?,?$/)
    {
      $id = $1;
    }
    if ($uid > 0 && length($id) > 0)
    {
      $uids{$uid} = $id;
      $uid = 0;
      $id = "";
      next;
    }
  }
  $in->close();

if (scalar(keys(%uids)) <= 0)
  {
    print " " x $indent, "Empty uidlist. Skipping...", $/;
    return 1;
  }

my $uidvalfile = $dir."/bincimap-uidvalidity";
  my ($uidvalidity, $uidnext) = (0, 0);
  die("Error: File $uidvalfile doesn't exist")
    if (!-f $uidvalfile);
  $in = IO::File->new("<".$uidvalfile)
    or die("Unable to open file: $uidvalfile");
  while(my $line = $in->getline())
  {
    if ($line =~ /^\t_uidvalidity\s=\s(\d+),?$/)
    {
      $uidvalidity = $1;
    }
    elsif ($line =~ /^\t_uidnext\s=\s(\d+),?$/)
    {
      $uidnext = $1;
    }
  }
  $in->close();

die("Error: either uidnext ($uidnext) or uidvalidity ($uidvalidity) is
invalid")
    if ($uidnext <= 0 || $uidvalidity <= 0);

my $version = 1;
  my $outfile = $dir."/dovecot-uidlist";;
  my $out = IO::File->new(">".$outfile)
    or die("Unable to create cache file $outfile");
  $out->print($version, " ", $uidvalidity, " ", $uidnext, $/);
  foreach my $uid (sort{$a <=> $b} (keys(%uids)))
  {
    $out->print($uid, " ", $uids{$uid}, $/);
  }
  $out->close();

my $stat = stat($infile);
  chown($stat->uid, $stat->gid, $outfile);
  chmod(0600, $outfile);

return 1;
}

sub convert_subscribtions
{
  my ($infile) = @_;
  my $dir = dirname($infile);
  my @cache = ();

print " " x $indent, "Converting subscriptions...", $/;
  my $in = IO::File->new("<".$infile)
    or die("Unable to open file: $infile");
  while(my $line = $in->getline())
  {
    next
      if ($line !~ /^$namespace/);
    $line =~ s/^$namespace?//;
    $line =~ s/\n$//;
    $line =~ s/\r$//;
    $line =~ s/\//\./g;
    next
      if (length($line) <= 0);
    next
      if (!-d $dir."/.".$line);
    push(@cache, $line)
      if (scalar(grep{$_ eq $line}(@cache)) <= 0);
  }
  $in->close();

my $outfile = $dir."/subscriptions";
  my $out = IO::File->new(">".$outfile)
    or die("Unable to create subscriptions file: $outfile");
  foreach my $subscription (@cache)
  {
    $out->print($subscription, $/);
  }
  $out->close();

my $stat = stat($infile);
  chown($stat->uid, $stat->gid, $outfile);
  chmod(0600, $outfile);

return 1;
}
---%<-------------------------------------------------------------------------

Usage: ./binc2dovecot.pl /path/to/user

NOTE:  /path/to/user/Maildir MUST exist. If "./Maildir" isn't your default
maildir-name, you can  edit this at the top of the script.

---%<-------------------------------------------------------------------------
Example 1:
# find /var/pop -mindepth 1 -maxdepth 1 -type d -exec
/path/to/binc2dove.pl {} \;

Example 2:
# find /usr/local/vpopmail/domains -mindepth 2 -maxdepth 2 -type d -exec
/path/to/binc2dove.pl {} \;
---%<-------------------------------------------------------------------------

Dovecot configuration
---------------------

Binc IMAP by default uses "INBOX/" as the IMAP namespace for private mailboxes.
If you want a transparent migration, you'll need to configure Dovecot to use a
namespace with "INBOX/" prefix as well.

---%<-------------------------------------------------------------------------
mail_location = maildir:~/Maildir
namespace {
  separator = /
  prefix = INBOX/
  inbox = yes
}
---%<-------------------------------------------------------------------------

Manual conversion
-----------------

* Binc's '.bincimap-subscribed' file is compatible with Dovecot's
   'subscriptions' file, but you need to remove the "INBOX/" prefixes from the
   mailboxes.
 * Binc's 'bincimap-cache + bincimap-uidvalidity' are NOT compatible with
   Dovecot's 'dovecot-uidlist' file. See file format documention or above
   script for conversion.
 * Binc's message flags are compatible with Dovecot (as they are specified by
   the Maildir specification)

(This file was created from the wiki on 2018-02-28 04:42)