Edit File: PasswordDatabase.ExtraFields.Proxy.txt
Proxying ======== Dovecot supports proxying IMAP, POP3 and <LMTP.txt> connections to other hosts. The proxying can be done for all users, or only for some specific users. There are two ways to do the authentication: 1. Forward the password to the remote server. The proxy may or may not perform authentication itself. This requires that the client uses only plaintext authentication, or alternatively the proxy has access to users' passwords in plaintext. 2. Let Dovecot proxy perform the authentication and login to remote server using the proxy's <master password> [MasterPassword.txt]. This allows client to use also non-plaintext authentication. The proxy is configured pretty much the same way as <login referrals> [PasswordDatabase.ExtraFields.Host.txt], with the addition of 'proxy' field. The common fields to use for both proxying ways are: * 'proxy' and 'proxy_maybe': Enables the proxying. Either one of these fields is required. * 'proxy_maybe' can be used to implement "automatic proxying". If the proxy destination matches the current connection, the user gets logged in normally instead of being proxied. If the same happens with 'proxy', the login fails with "Proxying loops" error. * 'proxy_maybe' with LMTP requires v2.1.0+ * 'proxy_maybe' with 'host=<dns name>' requires v2.1.2+. * 'auth_proxy_self' setting in dovecot.conf can be used to specify extra IPs that are also considered to be the proxy's own IPs. (v2.1.2+) * 'proxy_always' can be used with 'proxy_maybe' to conditionally do proxying to specified remote host (host isn't self) or to let director assign a backend host (host is self). So basically this setting just always sends the 'proxy' extra field to login process, but not necessarily the 'host'. Useful when dividing users across multiple director clusters. * 'host=s': The destination server's *IP address*. This field is required. * 'source_ip=s': The source IP address to use for outgoing connections. (v2.2.14+) * 'port=s': The destination server's port. The default is 143 with IMAP and 110 with POP3. * 'destuser=s': Tell client to use a different username when logging in. * 'proxy_mech=s': Tell client to use this SASL authentication mechanism when logging in. * 'proxy_timeout': Abort connection after this many seconds. * 'proxy_nopipelining': Don't pipeline IMAP commands. This is a workaround for broken IMAP servers that hang otherwise. (v2.2.11+) * 'proxy_not_trusted': IMAP/POP3 proxying never sends the ID/XCLIENT command to remote. (v2.2.27+) You can use SSL/TLS connection to destination server by returning: * 'ssl=yes': Use SSL and require a valid verified remote certificate. *WARNING: Unless used carefully, this is an insecure setting!* Before v2.0.16/v2.1.beta1 the host name isn't checked in any way against the certificate's CN. The only way to use this securely is to only use and allow your own private CA's certs, anything else is exploitable by a man-in-the-middle attack. * Note that 'ssl_client_ca_dir' or 'ssl_client_ca_file' aren't currently used for verifying the remote certificate, although ideally they will be in a future Dovecot version. For now you need to add the trusted remote certificates to 'ssl_ca'. * *NOTE: LMTP/doveadm proxying doesn't support SSL/TLS currently - any ssl/starttls extra field is ignored* * 'ssl=any-cert': Use SSL, but don't require a valid remote certificate. * 'starttls=yes': Use STARTTLS command instead of doing SSL handshake immediately after connected. * 'starttls=any-cert': Combine starttls and ssl=any-cert. * Additionally you can also tell Dovecot to send SSL client certificate to the remote server using 'ssl_client_cert' and 'ssl_client_key' settings in 'dovecot.conf' (v2.0.17+). Set 'login_trusted_networks' to point to the proxies in the backends. This way you'll get the clients' actual IP addresses logged instead of the proxy's. The destination servers don't need to be running Dovecot, but you should make sure that the Dovecot proxy doesn't advertise more capabilities than the destination server can handle. For IMAP you can do this by changing 'imap_capability' setting. For POP3 you'll have to modify Dovecot's sources for now ('src/pop3/capability.h'). Dovecot also automatically sends updated untagged CAPABILITY reply if it detects that the remote server has different capabilities than what it already advertised to the client, but some clients simply ignore the updated CAPABILITY reply. v2.2.14+: If your proxy handles a lot of connections (~64k) to the same destination IP you may run out of TCP ports. The only way to work around this is to use either multiple destination IPs or ports, or multiple source IPs. Multiple source IPs can be easily used by adding them to the 'login_source_ips' setting in 'dovecot.conf'. You can also use hostnames which expand to multiple IPs. By prefixing the setting with "?" (e.g.'login_source_ips = ?proxy-sources.example.com') Dovecot will use only those IPs that actually exist in the server, allowing you to share the same config file with multiple servers. It's probably better not to include the server's default outgoing IP address in the setting, as explained here [https://idea.popcount.org/2014-04-03-bind-before-connect/]. v2.2.19+: To avoid reconnection load spikes when a backend server dies, you can tell proxy to spread the client disconnections over a longer time period (after the server side of the connection is already disconnected).'login_proxy_max_disconnect_delay' setting in 'dovecot.conf' controls this (disabled by default). v2.2.29+: You can forward arbitratry variables by returning them prefixed with 'forward_}}. Dovecot will use protocol dependant way to forward these variables forward and they will appear on the other side as {{{forward_variable' Currently IMAP/POP3 only feature. This feature requires that the sending host is in login_trusted_networks. For IMAP the feature works by providing the variables as part of ID command, such as 'i ID ( ... "x-forward-var" "value")'. For POP3 the forwarding mecahism uses 'XCLIENT' with 'FORWARD=<base64 encoded blob of forwarded variables>' ID command forwarding (v2.2.29+) -------------------------------- If you want to forward, for some reason, the IMAP ID command provided by the client, set ---%<------------------------------------------------------------------------- imap_id_retain=yes ---%<------------------------------------------------------------------------- This will also enable client_id variable in variable expansions for auth requests, which will contain the ID command as IMAP arglist. Password forwarding ------------------- If you don't want proxy itself to do authentication, you can configure it to succeed with any given password. You can do this by returning an empty password and 'nopassword' field. Master password --------------- This way of forwarding requires the destination server to support master user feature. The users will be normally authenticated in the proxy and the common proxy fields are returned, but you'll need to return two fields specially: * 'master=s': This contains the master username (e.g. "proxy"). It's used as SASL auhentication ID. * Alternatively you could return 'destuser=user*master' and set 'auth_master_user_separator = *'. * 'pass=s': This field contains the master user's password. See <Authentication.MasterUsers.txt> for more information how to configure this. OAuth2 forwarding ----------------- If you want to forward <OAuth2> [PasswordDatabase.oauth2.txt] tokens, return field proxy_mech=%m as extra field. Example password forwarding static DB configuration --------------------------------------------------- See <PasswordDatabase.Static.txt> Example password forwarding SQL configuration --------------------------------------------- Create the SQL table: ---%<------------------------------------------------------------------------- CREATE TABLE proxy ( user varchar(255) NOT NULL, host varchar(16) default NULL, destuser varchar(255) NOT NULL default '', PRIMARY KEY (user) ); ---%<------------------------------------------------------------------------- Insert data to SQL corresponding your users. Working data could look like this: +------+-------------+-----------------+ | user | host | destuser | +------+-------------+-----------------+ | john | 192.168.0.1 | | +------+-------------+-----------------+ | joe | 192.168.0.2 | joe@example.com | +------+-------------+-----------------+ The important parts of 'dovecot.conf': ---%<------------------------------------------------------------------------- # If you want to trade a bit of security for higher performance, change these settings: service imap-login { service_count = 0 } service pop3-login { service_count = 0 } # If you are not moving mailboxes between hosts on a daily basis you can # use authentication cache pretty safely. auth_cache_size = 4096 auth_mechanisms = plain passdb { driver = sql args = /usr/local/etc/dovecot/dovecot-sql.conf.ext } ---%<------------------------------------------------------------------------- The important parts of 'dovecot-sql.conf.ext': ---%<------------------------------------------------------------------------- driver = mysql connect = host=sqlhost1 host=sqlhost2 dbname=mail user=dovecot password=secret password_query = SELECT NULL AS password, 'Y' as nopassword, host, destuser, 'Y' AS proxy FROM proxy WHERE user = '%u' ---%<------------------------------------------------------------------------- Example proxy_maybe SQL configuration ------------------------------------- Create the SQL table: ---%<------------------------------------------------------------------------- CREATE TABLE users ( user varchar(255) NOT NULL, domain varchar(255) NOT NULL, password varchar(100) NOT NULL, host varchar(16) NOT NULL, home varchar(100) NOT NULL, PRIMARY KEY (user) ); ---%<------------------------------------------------------------------------- The important parts of 'dovecot.conf': ---%<------------------------------------------------------------------------- # user/group who owns the message files: mail_uid = vmail mail_gid = vmail auth_mechanisms = plain passdb { driver = sql args = /usr/local/etc/dovecot/dovecot-sql.conf.ext } userdb sql { driver = sql args = /usr/local/etc/dovecot/dovecot-sql.conf.ext } ---%<------------------------------------------------------------------------- The important parts of 'dovecot-sql.conf.ext': ---%<------------------------------------------------------------------------- driver = mysql password_query = \ SELECT concat(user, '@', domain) AS user, password, host, 'Y' AS proxy_maybe \ FROM users WHERE user = '%n' AND domain = '%d' user_query = SELECT user AS username, domain, home \ FROM users WHERE user = '%n' AND domain = '%d' ---%<------------------------------------------------------------------------- Example proxy LDAP configuration -------------------------------- see: <PasswordDatabase.ExtraFields.txt> for more information, and a worked out example (This file was created from the wiki on 2018-02-28 04:42)