^^&&^^

Edit File: pgsql.lua

---
-- PostgreSQL library supporting both version 2 and version 3 of the protocol.
-- The library currently contains the bare minimum to perform authentication.
-- Authentication is supported with or without SSL enabled and using the
-- plain-text or MD5 authentication mechanisms.
--
-- The PGSQL protocol is explained in detail in the following references.
-- * http://developer.postgresql.org/pgdocs/postgres/protocol.html
-- * http://developer.postgresql.org/pgdocs/postgres/protocol-flow.html
-- * http://developer.postgresql.org/pgdocs/postgres/protocol-message-formats.html
--
-- @copyright Same as Nmap--See http://nmap.org/book/man-legal.html
-- @author "Patrik Karlsson <patrik@cqure.net>"

local bin = require "bin"
local nmap = require "nmap"
local stdnse = require "stdnse"
local openssl = stdnse.silent_require "openssl"
local string = require "string"
local table = require "table"
_ENV = stdnse.module("pgsql", stdnse.seeall)

-- Version 0.3
-- Created 02/05/2010 - v0.1 - created by Patrik Karlsson <patrik@cqure.net> 
-- Revised 02/20/2010 - v0.2 - added detectVersion to automaticaly detect and return 
--                             the correct version class
-- Revised 03/04/2010 - v0.3 - added support for trust authentication method

--- Supported pgsql message types
MessageType = {
	Error = 0x45,
	BackendKeyData = 0x4b,
	AuthRequest=0x52,
	ParameterStatus = 0x53,
	ReadyForQuery = 0x5a,
	PasswordMessage = 0x70,
}

--- Supported authentication types
AuthenticationType = {
	Success = 0x00,
	Plain = 0x03,
	MD5 = 0x05
}

-- Version 2 of the protocol
v2 =
{
	
	--- Pad a string with zeroes
	--
	-- @param str string containing the string to be padded
	-- @param len number containing the wanted length
	-- @return string containing the padded string value
	zeroPad = function(str, len)
		local padding = len - str:len()

if ( padding < 0 ) then
			return str
		end
		for i=1,padding do
			str = str .. string.char(0x00)
		end
		return str
	end,
	
	messageDecoder = {
		
		--- Decodes an Auth Request packet
		--
		-- @param data string containing raw data recieved from socket
		-- @param len number containing the length as retrieved from the header
		-- @param pos number containing the offset into the data buffer
		-- @return pos number containing the offset after decoding, -1 on error
		-- @return response table containing zero or more of the following <code>salt</code> and <code>success</code>
		--		   error string containing error message if pos is -1
		[MessageType.AuthRequest] = function( data, len, pos )
			local _, authtype
			local response = {}
			pos, authtype = bin.unpack(">I", data, pos)

if ( authtype == AuthenticationType.MD5 ) then
				if  ( len - pos + 1 ) < 3 then
					return -1, "ERROR: Malformed AuthRequest received"
				end
				pos, response.salt = bin.unpack("A4", data, pos)
			elseif ( authtype == AuthenticationType.Plain ) then
				--do nothing
			elseif ( authtype == 0 ) then
				response.success = true
			else
				stdnse.print_debug( ("unknown auth type: %d"):format(authtype) )
			end

response.authtype = authtype
			return pos, response
		end,

--- Decodes an Error packet
		--
		-- @param data string containing raw data recieved from socket
		-- @param len number containing the length as retrieved from the header
		-- @param pos number containing the offset into the data buffer
		-- @return pos number containing the offset after decoding
		-- @return response table containing zero or more of the following <code>error.severity</code>,
		-- <code>error.code</code>, <code>error.message</code>, <code>error.file</code>, 
		-- <code>error.line</code> and <code>error.routine</code>
		[MessageType.Error] = function( data, len, pos )
			local tmp = data:sub(pos, pos + len - 4)
			local response = {}
			local pos_end = pos + len

response.error = {}
			pos, response.error.message = bin.unpack("z", data, pos)
			return pos, response
		end,

--- Process the server response
	--
	-- @param data string containing the server response
	-- @param pos number containing the offset into the data buffer
	processResponse = function(data, pos)
		local ptype, len, status, response
		local pos = pos or 1

pos, ptype = bin.unpack("C", data, pos)
		len = data:len() - 1

if v2.messageDecoder[ptype] then
			pos, response = v2.messageDecoder[ptype](data, len, pos)

if pos ~= -1 then
				response.type = ptype
				return pos, response
			end
		else
			stdnse.print_debug( ("Missing decoder for %d"):format(ptype) )
			return -1, ("Missing decoder for %d"):format(ptype)
		end
		return -1, "Decoding failed"
	end,
	
	
	--- Reads a packet and handles additional socket reads to retrieve remaining data
	--
	-- @param socket socket already connected to the pgsql server
	-- @param data string containing any data already retrieved from the socket
	-- @param pos number containing the offset into the data buffer
	-- @return data string containing the initial and any additional data
	readPacket=function(socket, data, pos)

local pos = pos or 1
		local data = data or ""
		local status = true
		local tmp = ""
		local ptype, len

local catch = function() socket:close() stdnse.print_debug("processResponse(): failed") end	
		local try = nmap.new_try(catch)

if ( data == nil or data:len() == 0 ) then
			data = try(socket:receive())
		end
		return data
	end,
	
	--- Sends a startup message to the server containing the username and database to connect to
	--
	-- @param socket socket already connected to the pgsql server
	-- @param user string containing the name of the user
	-- @param database string containing the name of the database
	-- @return status true on success, false on failure
	-- @return table containing a processed response from <code>processResponse</code>
	--         string containing error message if status is false
	sendStartup=function(socket, user, database)
		local data, response, status, pos
		local proto_ver, ptype, _, tmp

local tty, unused, args = "", "", ""
		proto_ver = 0x0020000
		user = v2.zeroPad(user, 32)
		database = v2.zeroPad(database, 64)
		data = bin.pack(">I>IAAAAA", 296, proto_ver, database, user, v2.zeroPad(args, 64), v2.zeroPad(unused, 64), v2.zeroPad(tty,64) )

socket:send( data )

-- attempt to verify version
		status, data = socket:receive_bytes( 1 )

if ( not(status) ) then
			return false, "sendStartup failed"
		end

data = v2.readPacket(socket, data )
		pos, response = v2.processResponse( data )

if ( pos < 0 or response.type == MessageType.Error) then
			return false, response.error.message or "unknown error"
		end

return true, response
	end,
	
	--- Attempts to authenticate to the pgsql server
	-- Supports plain-text and MD5 authentication 
	--
	-- @param socket socket already connected to the pgsql server
	-- @param params table containing any additional parameters <code>authtype</code>, <code>version</code>
	-- @param username string containing the username to use for authentication
	-- @param password string containing the password to use for authentication
	-- @param salt string containing the crypthographic salt value
	-- @return status true on success, false on failure
	-- @return result table containing parameter status information,
	--         result string containing an error message if login fails 
	loginRequest = function ( socket, params, username, password, salt )

local catch = function() socket:close() stdnse.print_debug("loginRequest(): failed") end	
		local try = nmap.new_try(catch)
		local response = {}
		local status, data, len, pos, tmp

if ( params.authtype == AuthenticationType.MD5 ) then
			local hash = createMD5LoginHash(username,password,salt)
			data = bin.pack( ">Iz", 40, hash)
			try( socket:send( data ) )
		elseif ( params.authtype == AuthenticationType.Plain ) then
			local data
			data = bin.pack(">Iz", password:len() + 4, password)
			try( socket:send( data ) )
		elseif ( params.authtype == AuthenticationType.Success ) then
			return true, nil
		end

data, response.params = "", {}

data = v2.readPacket(socket, data, 1)
		pos, tmp = v2.processResponse(data, 1)

-- this should contain the AuthRequest packet
		if tmp.type ~= MessageType.AuthRequest then
			return false, "Expected AuthRequest got something else"
		end

if not tmp.success then
			return false, "Login failure"
		end

return true, response
	end,
	
}

-- Version 3 of the protocol
v3 =
{
	messageDecoder = {

--- Decodes an Auth Request packet
		--
		-- @param data string containing raw data recieved from socket
		-- @param len number containing the length as retrieved from the header
		-- @param pos number containing the offset into the data buffer
		-- @return pos number containing the offset after decoding, -1 on error
		-- @return response table containing zero or more of the following <code>salt</code> and <code>success</code>
		--		   error string containing error message if pos is -1
		[MessageType.AuthRequest] = function( data, len, pos )
			local _, authtype
			local response = {}

pos, authtype = bin.unpack(">I", data, pos)

response.authtype = authtype
			return pos, response
		end,

--- Decodes an ParameterStatus packet
		--
		-- @param data string containing raw data recieved from socket
		-- @param len number containing the length as retrieved from the header
		-- @param pos number containing the offset into the data buffer
		-- @return pos number containing the offset after decoding
		-- @return response table containing zero or more of the following <code>key</code> and <code>value</code>
		[MessageType.ParameterStatus] = function( data, len, pos )
			local tmp, _
			local response = {}

tmp = data:sub(pos, pos + len - 4)
			_, response.key, response.value = bin.unpack("zz", tmp)
			return pos + len - 4, response
		end,

response.error = {}

while ( pos < pos_end - 5 ) do
				pos, prefix, value = bin.unpack("Az", data, pos)

if prefix == 'S' then
					response.error.severity = value
				elseif prefix == 'C' then
					response.error.code = value
				elseif prefix == 'M' then
					response.error.message = value
				elseif prefix == 'F' then
					response.error.file = value
				elseif prefix == 'L' then
					response.error.line = value
				elseif prefix == 'R' then
					response.error.routine = value
				end
			end
			return pos, response
		end,

--- Decodes the BackendKeyData packet
		--
		-- @param data string containing raw data recieved from socket
		-- @param len number containing the length as retrieved from the header
		-- @param pos number containing the offset into the data buffer
		-- @return pos number containing the offset after decoding, -1 on error
		-- @return response table containing zero or more of the following <code>pid</code> and <code>key</code>
		--		   error string containing error message if pos is -1
		[MessageType.BackendKeyData] = function( data, len, pos )
			local response = {}
		
			if len ~= 12 then
				return -1, "ERROR: Invalid BackendKeyData packet"
			end

pos, response.pid, response.key = bin.unpack(">I>I", data, pos)
			return pos, response
		end,

--- Decodes an ReadyForQuery packet
		--
		-- @param data string containing raw data recieved from socket
		-- @param len number containing the length as retrieved from the header
		-- @param pos number containing the offset into the data buffer
		-- @return pos number containing the offset after decoding, -1 on error
		-- @return response table containing zero or more of the following <code>status</code>
		--		   error string containing error message if pos is -1
		[MessageType.ReadyForQuery] = function( data, len, pos )
			local response = {}

if len ~= 5 then
				return -1, "ERROR: Invalid ReadyForQuery packet"
			end
		
			pos, response.status = bin.unpack("C", data, pos )
			return pos, response
		end,
	},
	
	--- Reads a packet and handles additional socket reads to retrieve remaining data
	--
	-- @param socket socket already connected to the pgsql server
	-- @param data string containing any data already retrieved from the socket
	-- @param pos number containing the offset into the data buffer
	-- @return data string containing the initial and any additional data
	readPacket = function(socket, data, pos)

local pos = pos or 1
		local data = data or ""
		local status = true
		local tmp = ""
		local ptype, len
		local header

local catch = function() socket:close() stdnse.print_debug("processResponse(): failed") end	
		local try = nmap.new_try(catch)

if ( data:len() - pos < 5 ) then
			status, tmp = socket:receive_bytes( 5 - ( data:len() - pos ) )
		end

if not status then
			return nil, "Failed to read packet"
		end

if tmp:len() ~= 0 then
			data = data .. tmp
		end

pos, header = v3.decodeHeader(data,pos)

while data:len() < header.len do
			data = data .. try(socket:receive_bytes( ( header.len + 1 ) - data:len() ))
		end
		return data
	end,
	
	--- Decodes the postgres header
	--
	-- @param data string containing the server response
	-- @param pos number containing the offset into the data buffer
	-- @return pos number containing the offset after decoding
	-- @return header table containing <code>type</code> and <code>len</code>
	decodeHeader = function(data, pos)
		local ptype, len
		
		pos, ptype, len = bin.unpack("C>I", data, pos)
		return pos, { ['type'] = ptype, ['len'] = len }
	end,
	
	--- Process the server response
	--
	-- @param data string containing the server response
	-- @param pos number containing the offset into the data buffer
	-- @return pos number containing offset after decoding
	-- @return response string containing decoded data
	--         error message if pos is -1
	processResponse = function(data, pos)
		local ptype, len, status, response
		local pos = pos or 1
		local header
		
		pos, header = v3.decodeHeader( data, pos )

if v3.messageDecoder[header.type] then
			pos, response = v3.messageDecoder[header.type](data, header.len, pos)

if pos ~= -1 then
				response.type = header.type
				return pos, response
			end
		else
			stdnse.print_debug( "Missing decoder for %d", header.type )
			return -1, ("Missing decoder for %d"):format(header.type)
		end
		return -1, "Decoding failed"
	end,
	
	--- Attempts to authenticate to the pgsql server
	-- Supports plain-text and MD5 authentication 
	--
	-- @param socket socket already connected to the pgsql server
	-- @param params table containing any additional parameters <code>authtype</code>, <code>version</code>
	-- @param username string containing the username to use for authentication
	-- @param password string containing the password to use for authentication
	-- @param salt string containing the crypthographic salt value
	-- @return status true on success, false on failure
	-- @return result table containing parameter status information,
	--         result string containing an error message if login fails 
	loginRequest = function ( socket, params, username, password, salt )

local catch = function() socket:close() stdnse.print_debug("loginRequest(): failed") end	
		local try = nmap.new_try(catch)
		local response, header = {}, {}
		local status, data, len, tmp, _
		local pos = 1

if ( params.authtype == AuthenticationType.MD5 ) then
			local hash = createMD5LoginHash(username, password, salt)
			data = bin.pack( "C>Iz", MessageType.PasswordMessage, 40, hash )
			try( socket:send( data ) )
		elseif ( params.authtype == AuthenticationType.Plain ) then
			local data
			data = bin.pack("C>Iz", MessageType.PasswordMessage, password:len() + 4, password)
			try( socket:send( data ) )
		elseif ( params.authtype == AuthenticationType.Success ) then
			return true, nil
		end

data, response.params = "", {}

data = v3.readPacket(socket, data, 1)
		pos, tmp = v3.processResponse(data, 1)

-- this should contain the AuthRequest packet
		if tmp.type ~= MessageType.AuthRequest then
			return false, "Expected AuthRequest got something else"
		end

if not tmp.success then
			return false, "Login failure"
		end

repeat
			data = v3.readPacket(socket, data, pos)
			pos, tmp = v3.processResponse(data, pos)
			if ( tmp.type == MessageType.ParameterStatus ) then
				table.insert(response.params, {name=tmp.key, value=tmp.value})
			end
		until pos >= data:len() or pos == -1

return true, response
	end,
	
	--- Sends a startup message to the server containing the username and database to connect to
	--
	-- @param socket socket already connected to the pgsql server
	-- @param user string containing the name of the user
	-- @param database string containing the name of the database
	-- @return status true on success, false on failure
	-- @return table containing a processed response from <code>processResponse</code>
	--         string containing error message if status is false
	sendStartup = function(socket, user, database )
		local data, response, status, pos
		local proto_ver, ptype, _, tmp

proto_ver = 0x0030000
		data = bin.pack(">IzzzzH", proto_ver, "user", user, "database", database, 0)
		data = bin.pack(">I", data:len() + 4) .. data

socket:send( data )

-- attempt to verify version
		status, data = socket:receive_bytes( 2 )

if ( not(status) ) then
			return false, "sendStartup failed"
		end
		
		if ( not(status) or data:match("^EF") ) then
			return false, "Incorrect version"
		end

data = v3.readPacket(socket, data )
		pos, response = v3.processResponse( data )

if ( pos < 0 or response.type == MessageType.Error) then
			return false, response.error.message or "unknown error"
		end

return true, response
	end
}

--- Sends a packet requesting SSL communication to be activated
-- 
-- @param socket socket already connected to the pgsql server
-- @return boolean true if request was accepted, false if request was denied
function requestSSL(socket)
	-- SSLRequest
	local ssl_req_code = 80877103
	local data = bin.pack( ">I>I", 8, ssl_req_code)
	local status, response
	
	socket:send(data)
	status, response = socket:receive_bytes(1)
	
	if ( not(status) ) then
		return false
	end
	
	if ( response == 'S' ) then
		return true
	end

return false
end

--- Creates a cryptographic hash to be used for login
--
-- @param username username
-- @param password password
-- @param salt salt
-- @return string suitable for login request
function createMD5LoginHash(username, password, salt)
	local md5_1 = select( 2, bin.unpack( "H16", openssl.md5(password..username) ) ):lower()
	return "md5" .. select( 2, bin.unpack("H16", openssl.md5(  md5_1 .. salt  ) ) ):lower()
end

--- Prints the contents of the error table returned from the Error message decoder
--
-- @param dberror table containing the error
function printErrorMessage( dberror )
	if not dberror then
		return
	end
	for k, v in pairs(dberror) do
		stdnse.print_debug( ("%s=%s"):format(k, v) )
	end
end

--- Attempts to determine if the server supports v3 or v2 of the protocol
--
-- @param host table
-- @param port table
-- @return class v2 or v3
function detectVersion(host, port)
	local status, response
	local socket = nmap.new_socket()

socket:connect(host, port)
	status, response = v3.sendStartup(socket, "versionprobe", "versionprobe")
	socket:close()
	
	if ( not(status) and response == 'Incorrect version' ) then		
		return v2
	end
	
	return v3
end

return _ENV;